43 of 119 lenses
ACUVUE VITA
SphereMonthly
BC8.4, 8.8
Dia14.0
Dk103
H₂O41%
Power+8.00 to -12.00
Power Range
+8.00 to -12.00
Modulus
0.77 MPa
CT @ −3.00D
.07mm
Extended Wear
No
Material
senofilcon C
UV Blocking
Class 1
Non-ionicSilicone Hydrogel
Available Powers
+8.ooD to -12.00D (excludes Plano, 0.50D steps after ±6.00D)
Design Notes
Material
HydraMax Technology, a non-coated silicone hydrogel formulation balanced to help maximize and maintain hydration throughout the lens.
Wetting agent
Tear-Infused Design, a tear-like wetting agent integrated throughout the lens, supporting a 33% lower evaporation rate than Ultra, Biofinity and Air Optix Aqua.
Study
Comfort up to 24% higher than Air Optix Aqua and 21% higher than Ultra and Biofinity, in a 30-day dispensing evaluation, n = 533 soft silicone hydrogel wearers in the US.
ACUVUE VITA for ASTIGMATISM
ToricMonthly
BC8.6
Dia14.5
Dk103
H₂O41%
Power+4.00 to -9.00
Power Range
+4.00 to -9.00
Modulus
0.77 MPa
CT @ −3.00D
.08mm
Extended Wear
No
Material
senofilcon C
UV Blocking
Class 1
Non-ionicSilicone Hydrogel
Available Powers
-6.00D to +6.00D in 0.25D steps
-6.50D to -9.00D in 0.50D steps
CYL: -0.75, -1.25, -1.75, -2.25, -2.75
Axis: 10° to 180° (in 10° steps)
Design Notes
Stabilization
BLINK STABILIZED Design. A four stability zone design is more resistant to gravity and delivers a prism-free optic zone.
Material
HydraMax Technology, a non-coated silicone hydrogel formulation balanced to help maximize and maintain hydration throughout the lens.
Wetting agent
Tear-Infused Design, a tear-like wetting agent integrated throughout the lens, helping support a 33% lower evaporation rate compared with other monthly reusable lenses including Ultra, Biofinity and Air Optix Aqua.
Study
Comfort up to 24% higher than Air Optix, 21% higher than Biofinity and 21% higher than Ultra, in a 30-day dispensing evaluation, n = 533 soft silicone hydrogel contact lens wearers in the United States.
Fitting
Published parameter coverage reaches 95.5% of astigmatic patients.
AIR OPTIX COLORS
ColorsSphereMonthly
BC8.6
Dia14.2
Dk110
H₂O33%
Power+6.00 to -8.00
Power Range
+6.00 to -8.00
Modulus
1.1 MPa
CT @ −3.00D
.08mm
Extended Wear
No
Material
lotrafilcon B
Non-ionicSilicone Hydrogel
Available Powers
Plano to ±6.00D (0.25D steps), -6.50D to -8.00D (-0.50D steps)
Design Notes
Colors
3-in-1 color technology across a full range of 12 color enhancements at varying levels of brightness.
Surface
SmartShield Technology, which helps keep moisture on the lens for consistent comfort.
Material
The parameter table and the safety information for this lens disagree, giving lotrafilcon A and lotrafilcon B.
AIR OPTIX NIGHT & DAY AQUA
SphereMonthly
BC8.4, 8.6
Dia13.8
Dk140
H₂O24%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
1.5 MPa
CT @ −3.00D
0.08mm
Extended Wear
1 Month
Material
lotrafilcon A
Non-ionicSilicone Hydrogel
Available Powers
+6.00D TO -10.00D (includes Plano, 0.50D steps after -8.50D)
Design Notes
Surface
SmartShield Technology, a plasma coating applied to the lens; its layer composition and thickness are not published, on the product page or in the lens's FDA file.
Indication
Vision correction and therapeutic use, with therapeutic use requiring active oversight by the eye care practitioner.
Study
A one-year post-market study found severe corneal infection in 0.18% of wearers, 18 in 10,000 wearers, and a permanent reduction in vision of two or more rows of letters in 0.04%, 4 in 10,000.
Note
Approximately 80% of wearers tolerate extended wear, and about two-thirds achieve the full 30 nights of continuous wear.
AIR OPTIX plus HydraGlyde
SphereMonthly
BC8.6
Dia14.2
Dk110
H₂O33%
Power+8.00 to -12.00
Power Range
+8.00 to -12.00
Modulus
1.1 MPa
CT @ −3.00D
.08mm
Extended Wear
1 Week
Material
lotrafilcon B
Non-ionicSilicone Hydrogel
Available Powers
+8.00D to -12.00D (excludes Plano, 0.50D steps after +6.50D/-8.50D)
Design Notes
Surface
SmartShield Technology, an ultra-thin protective layer that shields the lens from irritating deposits all month, holding median total cholesterol uptake to 0.4 µg/lens against 1.31 for Biofinity, 1.55 for PureVision, 2.8 for Acuvue Oasys, 3.96 for Avaira and 5.13 for Ultra.
Wetting agent
HydraGlyde Moisture Matrix, a polyoxyethylene-polyoxybutylene copolymer (EO45BO10) held at 0.04%, 400 ppm, in the blister solution alongside 1% Copolymer 845.
Study
Initial insertion comfort rated 9 out of 10 by patients, in a randomized, double-masked clinical study with 337 patients at 25 sites.
Note
Mean time to lens surface moisture breakup 19 seconds after 16 hours of simulated wear, against 15 for Ultra, 14 for Air Optix Aqua, 14 for Acuvue Vita, 9 for Acuvue Oasys and 6 for Biofinity, P<0.01.
AIR OPTIX plus HydraGlyde for Astigmatism
ToricMonthly
BC8.7
Dia14.5
Dk110
H₂O33%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
1.1 MPa
CT @ −3.00D
0.102mm
Extended Wear
1 Week
Material
lotrafilcon B
Non-ionicSilicone Hydrogel
Available Powers
SPH: +6.00 to -10.00D (includes Plano, 0.50D steps after -6.00D)
CYL: Around the clock (10 degree steps)
Design Notes
| Stabilization: Precision Balance 8 | 4 design, a modified prism ballast with two anchor points, marked 8 at the lower left and 4 at the lower right of the lens face. |
|---|---|
| Geometry: Wide optic zone, with scribe marks at 3, 6 and 9 o'clock that allow lens observation at multiple angles. | |
| Study: Rotational stability in just 30 seconds, from a randomized, subject-masked clinical study at 11 sites with 83 subjects, and oscillation of 5 degrees or less with blink, from a randomized, subject-masked, multi-site clinical study with over 150 patients, both run with AIR OPTIX for Astigmatism lenses. | |
| Surface: SmartShield Technology, an ultra-thin protective layer that shields the lens from irritating deposits all month, holding median total cholesterol uptake to 0.4 µg/lens against 1.31 for Biofinity, 1.55 for PureVision, 2.8 for Acuvue Oasys, 3.96 for Avaira and 5.13 for Ultra. | |
| Wetting agent: HydraGlyde Moisture Matrix, a polyoxyethylene-polyoxybutylene copolymer (EO45BO10) held at 0.04%, 400 ppm, in the blister solution alongside 1% Copolymer 845. |
AIR OPTIX plus HydraGlyde Multifocal
MultifocalMonthly
BC8.6
Dia14.2
Dk110
H₂O33%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
1.1 MPa
CT @ −3.00D
.08mm
Extended Wear
1 Week
Material
lotrafilcon B
Non-ionicSilicone Hydrogel
Available Powers
+6.00 D to -10.00 D (includes Plano, 0.25 D steps)
Design Notes
Optics
Precision Profile Design, center-near, with near at the center of the optic, intermediate between center and edge and distance at the periphery, the optical zone size optimized for a wide range of pupil sizes.
Add
Three add powers, low, medium and high.
Surface
SmartShield Technology, an ultra-thin protective layer that shields the lens from irritating deposits all month, holding median total cholesterol uptake to 0.4 µg/lens against 1.31 for Biofinity, 1.55 for PureVision, 2.8 for Acuvue Oasys, 3.96 for Avaira and 5.13 for Ultra.
Wetting agent
HydraGlyde Moisture Matrix, a polyoxyethylene-polyoxybutylene copolymer (EO45BO10) held at 0.04%, 400 ppm, in the blister solution alongside 1% Copolymer 845.
Note
Mean time to lens surface moisture breakup 19 seconds after 16 hours of simulated wear, against 15 for Ultra, 14 for Air Optix Aqua, 14 for Acuvue Vita, 9 for Acuvue Oasys and 6 for Biofinity, P<0.01.
Initial Fitting Guide
| Spectacle Add | Lens Selection |
|---|---|
| Up to +1.25D | LO OU |
| +1.50D to +2.00D | MED OU |
| +2.25D to +2.50D | HI OU |
Troubleshooting — Poor Near (Step 1)
Same add + additional +0.50D to Non-Dom.
Troubleshooting — Poor Near (Step 2)
Move both eyes up one add level.
| Spectacle Add | Dominant Eye | Non-Dominant Eye |
|---|---|---|
| Up to +1.25D | MED | MED |
| +1.50D to +2.00D | MED | HI |
Troubleshooting — Poor Distance
Lower Dom eye add.
| Spectacle Add | Dominant Eye | Non-Dominant Eye |
|---|---|---|
| +1.50D to +2.00D | LO | MED |
| +2.25D to +2.50D | HI | MED |
Biofinity
SphereMonthly
BC8.6
Dia14.0
Dk128
H₂O48%
Power+15.00 to -20.00
Power Range
+15.00 to -20.00
Modulus
0.75 MPa
CT @ −3.00D
.08mm
Extended Wear
1 Week
Material
comfilcon A
Non-ionicSilicone Hydrogel
Availability● Available
Also Sold AsAquaclearAquatech Plus PremiumNatural Eyes HydraWear XWPearle MonthlySofmed breathables XWEthos AquaTech MonthlyiWear OxygenVoyant MonthlyLenscrafters MonthlyPearle Vision MonthlyUp&Up Monthly Performance
Pack Sizes6
Available Powers
+15.00D to -20.00D (0.50D steps after +/-6.00D, "XR" after +8 and -12.)
Design Notes
Optics
Aspheric, with the Aberration Neutralizing System minimizing spherical aberrations so incoming light rays converge for better focus.
Material
Aquaform Technology, which retains water from core to surface without a surface coating or added wetting agents in the lens material.
Note
The sphere range covers 99.9% of spherical prescriptions in a prescription coverage database spanning 14 to 70 years.
Biofinity Energys
SphereMonthly
BC8.6
Dia14.0
Dk128
H₂O48%
Power+8.00 to -12.00
Power Range
+8.00 to -12.00
Modulus
0.75 MPa
CT @ −3.00D
.08mm
Extended Wear
1 Week
Material
comfilcon A
Non-ionicSilicone Hydrogel
Availability● Available
Also Sold AsAquaclear PremiumLenscrafters Monthly Modern LifestylePearle Vision Monthly BalanceVoyant Monthly PremiumEthos AquaTech Evolve Monthly
Pack Sizes6
Available Powers
+8.00D to -12.00D (0.50D steps after ±6.00D)
Design Notes
Optics
Single vision aspheric, DigitalBoost Technology, delivering a +0.3D boost which may help ease strain on ciliary muscles so the wearer can shift focus from on screen to off with less effort.
Material
Aquaform Technology, which retains water from core to surface without the need for surface coating or added wetting agents in the lens material.
Study
Overall comfort rated 9 out of 10 by wearers, in a US in-market assessment survey conducted by eye care professionals, N=150 patients wearing Biofinity Energys.
Note
A study conducted with Biofinity Energys and sphere found a statistically significant difference of the mean change in accommodative microfluctuations compared to a lens without DigitalBoost, after reading on an iPhone 5 for 20 minutes held at a distance of 25 cm.
Availability
Plano is not made in this design.
Biofinity multifocal
MultifocalMonthly
BC8.6
Dia14.0
Dk128
H₂O48%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
0.75 MPa
CT @ −3.00D
.09mm
Extended Wear
1 Week
Material
comfilcon A
Non-ionicSilicone Hydrogel
Availability● Available
Also Sold AsAquaclear MultifocalSofmed breathables XW multifocalVoyant Monthly MultifocalPearle Vision Monthly MultifocalNatural Eyes HydraWear XW MultifocalMediflex Elite MultifocalLenscrafters Monthly MultifocalEthos AquaTech Monthly Multifocal
Pack Sizes6
Available Powers
+6.00D to -10.00D (0.50D steps after -6.00D)
Design Notes
Optics
Balance Progressive Technology, two different optical designs, individualized for each wearer and eye by fitting a D lens or an N lens.
Add
+1.00, +1.50, +2.00 and +2.50, with the design optimized for each sphere and add power.
Material
Aquaform Technology, which retains water from core to surface without a surface coating or added wetting agents in the lens material.
Study
98% of wearers fit in two pairs of lenses or fewer using the OptiExpert fitting app, in a retrospective analysis of N=55 subjects, 110 eyes.
Initial Fitting Guide
| Spectacle Add | Dominant Eye | Non-Dominant Eye |
|---|---|---|
| +0.75D to +1.25D | +1.50 D | +1.50 D |
| +1.50D to +1.75D | +1.50 D | +1.50 N |
| +2.00D to +2.25D | +2.00 D | +2.00 N |
| +2.50D or above | +2.50 D | +2.50 N |
Troubleshooting
| Complaint | Action |
|---|---|
| Poor distance | Add ±0.25D (up to ±0.50D) to the eye that needs improvement. |
| Poor near | Add ±0.25D (up to ±0.50D) to the eye that needs improvement. |
Biofinity toric
ToricMonthly
BC8.7
Dia14.5
Dk128
H₂O48%
Power+8.00 to -10.00
Power Range
+8.00 to -10.00
Modulus
0.75 MPa
CT @ −3.00D
0.11mm
Extended Wear
1 Week
Material
comfilcon A
Non-ionicSilicone Hydrogel
Availability● Available
Also Sold AsAquaclear ToricAquatech Plus Premium ToricSofmed breathables XW toricEthos AquaTech Monthly for AstigmatismiWear Oxygen for AstigmatismLenscrafters Monthly for AstigmatismMediflex Aquafinity 116 ToricMediflex Elite ToricNatural Eyes HydraWear XW for AstigmatismPearle Vision Monthly for AstigmatismVoyant Monthly Toric
Pack Sizes6
Available Powers
Sphere power: +8.00D to -10.00D (0.50D steps after +/-6.00D)
Cylinder power: -0.75, -1.25, -1.75, -2.25
Axis: 10° to 180° (10° steps)
Design Notes
Stabilization
Optimized Toric Lens Geometry, a uniform horizontal thickness with a wide ballast band that orients the lens.
Material
Aquaform Technology, which retains water from core to surface without a surface coating or added wetting agents in the lens material.
Study
96% of patients surveyed would recommend the lens to family and friends, in a consumer rebate online survey of n=216 patients who wore it in the past 12 months.
Biofinity toric multifocal
Toric MFMonthly
BC8.7
Dia14.5
Dk128
H₂O48%
Power+10.00 to -10.00
Power Range
+10.00 to -10.00
Modulus
0.75 MPa
CT @ −3.00D
.09mm
Extended Wear
1 Week
Material
comfilcon A
Non-ionicSilicone Hydrogel
Available Powers
SPH: -10.00D to +10.00D (includes plano, 0.50D steps after ±6.00D)
CYL: -0.75D to -5.75D (0.50D steps)
AXS: Full circle (5º steps)
Design Notes
Optics
Balance Progressive Technology, two different optical designs, individualized for each wearer and eye by fitting a D lens or an N lens.
Stabilization
Optimized Toric Lens Geometry, a uniform horizontal thickness with a wide ballast band that orients the lens.
Material
Aquaform Technology, which retains water from core to surface without a surface coating or added wetting agents in the lens material.
Study
93% success on initial fitting using the fitting guide, in a subject masked, randomized, bilateral, cross-over evaluation of 27 wearers, astigmatic presbyopes at 2 sites in the UK and US.
Availability
Made to order, predominantly manufactured in Scottsville, N.Y., with most U.S. orders reaching customers within a week.
Initial Fitting Guide
| Spectacle Add | Dominant Eye | Non-Dominant Eye |
|---|---|---|
| +0.75D to +1.25D | +1.00 D | +1.00 D |
| +1.50D to +1.75D | +1.50 D | +1.50 D |
| +2.00D | +2.00 D | +2.00 N |
| +2.50D or above | +2.50 D | +2.50 N |
Biofinity XR toric
ToricMonthly
BC8.7
Dia14.5
Dk128
H₂O48%
Power+20.00 to -20.00
Power Range
+20.00 to -20.00
Modulus
0.75 MPa
CT @ −3.00D
.11mm
Extended Wear
1 Week
Material
comfilcon A
Non-ionicSilicone Hydrogel
Available Powers
Sphere power: +8.50D to +20.00D and -10.50D to -20.00D (0.50D steps)
Cylinder power: -0.75, -1.25, -1.75, -2.25
Axis: 5° to 180° (5° steps)
Sphere power: +20.00D to -20.00D (0.50D steps after +/-6.00D)
Cylinder power: -2.75, -3.25, -3.75, -4.25, -4.75, -5.25, -5.75
Axis: 5° to 180° (in 5° steps)
Design Notes
Stabilization
Optimized Toric Lens Geometry, a uniform horizontal thickness with a wide ballast band that orients the lens.
Material
Aquaform Technology, which retains water from core to surface without a surface coating or added wetting agents in the lens material.
Availability
Made to order, with 2,338 prescription options available for next-day shipping including trials and 6-packs.
Clearcolor
ColorsSphereMonthly
BC8.6
Dia14.2
Dk10
H₂O38%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
CT @ −3.00D
0.070mm
Extended Wear
No
Material
polymacon
HydrogelNon-ionic
Available Powers
0.00D to -6.00D (0.25D steps)
-6.50D to -10.00D (0.50D steps)
+0.50D to +6.00D (0.50D steps)
Design Notes
Colors
Five color categories, Gray/Black, Brown, Green/Violet, Blue and Galaxy, with availability varying by region.
Surface
Special Invert Padding Technology holds the pigment so it does not protrude at the surface and isolates the color from the ocular surface.
Packaging
1 lens per vial or 2 lenses per box.
Note
The pigments are FDA-approved medical grade.
Clearcolor Custom
ColorsSphereMonthly
BC8.2, 8.6, 8.8
Dia14.2, 14.5
Dk10
H₂O38%
Power+20.00 to -20.00
Power Range
+20.00 to -20.00
CT @ −3.00D
0.070mm
Extended Wear
No
Material
polymacon
HydrogelNon-ionic
Available Powers
+6.00D to -6.00D (0.25D steps)
+6.50D to +20.00D (0.50D steps)
-6.50D to -20.00D (0.50D steps)
Design Notes
Colors
Five color categories, Gray/Black, Brown, Green/Violet, Blue and Galaxy, with availability varying by region.
Surface
Special Invert Padding Technology holds the pigment so it does not protrude at the surface and isolates the color from the ocular surface.
Base curve
8.20 mm, 8.60 mm and 8.80 mm.
Diameter
14.20 mm and 14.50 mm.
Packaging
1 lens per vial.
eyedia precise monthly
SphereMonthly
BC8.6
Dia14.2
Dk25
H₂O57%
Power+6.00 to -12.00
Power Range
+6.00 to -12.00
CT @ −3.00D
0.084mm
Extended Wear
No
Material
hioxifilcon A
HydrogelNon-ionic
Available Powers
0.00D to -6.00D (0.25D steps)
-6.50D to -12.00D (0.50D steps)
+0.25D to +4.00D (0.25D steps)
+4.50D to +6.00D (0.50D steps)
Design Notes
Optics
An aspheric design corrects spherical aberration.
Surface
AQUAGRIP technology gives the lens its dimensional stability.
Base curve
8.60.
Diameter
14.20 mm.
Handling tint
Light blue.
Fitting
Powers run -12.00 to +6.00, in 0.25D steps from 0.00 to -6.00 and +0.25 to +4.00, and 0.50D steps from -6.50 to -12.00 and +4.50 to +6.00.
Replacement
Monthly wear.
Packaging
Standard pack size is 6 lenses.
Initial Fitting Guide
Clearlab's fitting guide prefers a trial lens, taking the steeper base curve first. Its keratometry shortcut gives one stock design: for an average K of 39.50 to 41.50 and higher, 8.6 mm base curve / 14.2 mm diameter.
eyedia precise monthly for astigmatism
ToricMonthly
BC8.7
Dia14.4
Dk24
H₂O57%
Power+4.00 to -8.00
Power Range
+4.00 to -8.00
CT @ −3.00D
0.099mm
Extended Wear
No
Material
hioxifilcon A
HydrogelNon-ionic
Available Powers
SPH: 0.00D to -6.00D (0.25D steps)
-6.50D to -8.00D (0.50D steps)
+0.25D to +4.00D (0.25D steps)
CYL: -0.75D, -1.25D, -1.75D, -2.25D
AXS: 10° to 180° (10° steps)
Design Notes
Stabilization
A patented dynamic stabilization design holds the toric axis.
Surface
AQUAGRIP technology gives the lens its dimensional stability.
Fitting
Sphere powers run -8.00 to +4.00, with cylinders of -0.75D, -1.25D, -1.75D and -2.25D and axes from 10 to 180 degrees in 10 degree steps.
Base curve
8.70.
Diameter
14.40 mm.
Handling tint
Light blue.
Replacement
Monthly wear.
Packaging
Standard pack size is 6 lenses.
Note
Orientation is described two ways, an arrow positional mark and a single line indication at 6 o'clock.
Initial Fitting Guide
Convert the spectacle Rx to minus-cylinder form, vertex-compensate both principal meridians to 0 mm, then add half the cylinder to the sphere. Clearlab's keratometry shortcut gives one stock design: for an average K of 39.50 to 41.50 and higher, 8.6 mm base curve / 14.2 mm diameter. Trial-fit and judge lens rotation off the single 6 o'clock line.
eyedia soft 55
SphereMonthly
BC8.7
Dia14.5
Dk24
H₂O55%
Power+6.00 to -12.00
Power Range
+6.00 to -12.00
CT @ −3.00D
0.090mm
Extended Wear
No
Material
methafilcon A
UV Blocking
Class 2
HydrogelIonic
Available Powers
0.00D to -6.00D (0.25D steps)
-6.50D to -12.00D (0.50D steps)
+0.25D to +4.00D (0.25D steps)
+4.50D to +6.00D (0.50D steps)
Design Notes
Optics
Aberration correcting aspheric optics.
UV
Class 2 blocking across UVA and UVB.
Base curve
8.70.
Diameter
14.50 mm.
Handling tint
Light blue.
Fitting
Powers run -12.00 to +6.00, in 0.25D steps from 0.00 to -6.00 and +0.25 to +4.00, and 0.50D steps from -6.50 to -12.00 and +4.50 to +6.00.
Packaging
Standard pack size is 6 lenses.
Study
A 120 patient double masked crossover study compared the lens with other brands.
Initial Fitting Guide
Clearlab's fitting guide prefers a trial lens, taking the steeper base curve first. Its keratometry shortcut gives one stock design: for an average K of 39.50 to 41.50 and higher, 8.7 mm base curve / 14.5 mm diameter.
eyedia soft 58
SphereMonthly
BC8.3, 8.7
Dia14.0, 14.5
Dk22
H₂O58%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
CT @ −3.00D
0.096mm
Extended Wear
No
Material
etafilcon A
UV Blocking
Yes
HydrogelIonic
Available Powers
0.00D to -6.00D (0.25D steps)
-6.50D to -10.00D (0.50D steps)
+0.25D to +4.00D (0.25D steps)
+4.50D to +6.00D (0.50D steps)
Design Notes
Edge
True Edge geometry, aimed at movement, comfort and handling.
UV
Blocking covers UVA and UVB.
Base curve
Minus powers use 8.70 or 8.30, and plus powers use 8.70 only.
Diameter
Minus powers are 14.00 mm and plus powers 14.50 mm.
Handling tint
Light blue.
Fitting
Powers run -10.00 to +6.00, in 0.25D steps from 0.00 to -6.00 and +0.25 to +4.00, and 0.50D steps from -6.50 to -10.00 and +4.50 to +6.00.
Packaging
Standard pack size is 6 lenses.
Note
The edge carries two names, Truform edge and True Edge.
Initial Fitting Guide
Clearlab's fitting guide prefers a trial lens, taking the steeper base curve first, and gives three stock designs by average K: 41.25 and lower, 8.9 mm / 14.5 mm; 41.50 to 45.50, 8.6 mm / 14.5 mm; 41.75 and higher, 8.3 mm / 14.5 mm, which is not available in plus powers.
Miru 1month Menicon
SphereMonthly
BC8.3, 8.6
Dia14.0
Dk129
H₂O40%
Power+6.00 to -13.00
Power Range
+6.00 to -13.00
Modulus
0.9 MPa
CT @ −3.00D
.08mmmm
Extended Wear
No
Material
asmofilcon A
Silicone HydrogelNon-ionic
Available Powers
+6.00D to -6.00D (0.25D steps)
-6.50D to -13.00D (0.50D steps)
No plano option
Design Notes
Material
MeniSilk, a silicone polymerization carrying a hydrophilic monomer.
Surface
NanoGloss, a nanometer-precision surface technology that reduces bacterial biofilm adhesion and lipid deposits.
Edge
One edge profile applied across the whole power range, with the lens periphery and the edge thickness held the same from power to power.
Miru 1month Menicon Multifocal
MultifocalMonthly
BC8.6
Dia14.2
Dk129
H₂O40%
Power+6.00 to -13.00
Power Range
+6.00 to -13.00
Modulus
0.9 MPa
CT @ −3.00D
0.08mm
Extended Wear
No
Material
asmofilcon A
Silicone HydrogelNon-ionic
Available Powers
+6.00D to -6.00D (0.25D steps)
-6.50D to -13.00D (0.50D steps)
ADD: LOW (+1.00) and HIGH (+2.00)
Design Notes
Optics
Center-near, three zones balanced to control depth of focus, with a progressive multifocal geometry running into distance.
Material
MeniSilk, a silicone polymerization carrying a hydrophilic monomer.
Surface
NanoGloss, a nanometer-precision surface technology that reduces bacterial biofilm adhesion and lipid deposits.
Edge
One edge profile applied across the whole power range, with the lens periphery and the edge thickness held the same from power to power.
Initial Fitting Guide
Refraction first
best-vision sphere with maximum plus, binocularly balanced; vertex-correct at +/-4.00D and above.
| Spectacle Add | Both Eyes |
|---|---|
| +0.75D to +1.75D | LOW OU |
| +2.00D to +2.50D | HIGH OU |
Keep the add design the same in both eyes where possible, and always push the plus at distance.
Troubleshooting - Poor Near
Add +0.25D, non-dominant eye first.
Troubleshooting - Poor Distance
Add -0.25D to the dominant eye. Distance enhancements are generally not needed with the HIGH design (decentred near-vision zone).
Full guide
Miru 1month Menicon Toric
ToricMonthly
BC8.6
Dia14.0
Dk129
H₂O40%
Power+0.00 to -10.00
Power Range
+0.00 to -10.00
Modulus
0.9 MPa
CT @ −3.00D
0.08mm
Extended Wear
No
Material
asmofilcon A
Silicone HydrogelNon-ionic
Available Powers
SPH: Plano to -6.00D (0.25D steps)
-6.50D to -10.00D (0.50D steps)
CYL: -0.75D, -1.25D, -1.75D
AXIS: 10° to 180° around the clock (10° steps)
Design Notes
Stabilization
Visiostable Design, a dynamic asymmetric system whose asymmetric vertical thin zones match the eyelids' asymmetric coverage of the cornea and harness lid force to prevent rotation.
Fitting
For effective stabilization, insert the lens with the axis mark inferiorly.
Material
MeniSilk, a silicone polymerization carrying a hydrophilic monomer.
Surface
NanoGloss, a nanometer-precision surface technology that reduces bacterial biofilm adhesion and lipid deposits.
Edge
One edge profile applied across the whole power range, with the lens periphery and the edge thickness held the same from power to power.
Phantom
ColorsSphereMonthly
BC8.6
Dia14.2, 14.5
Dk10
H₂O38%
Power+0.00 to -6.00
Power Range
+0.00 to -6.00
CT @ −3.00D
0.070mm
Extended Wear
No
Material
polymacon
HydrogelNon-ionic
Available Powers
Plano to -6.00D (0.25D steps)
Design Notes
Colors
Opaque graphic designs giving full iris coverage, intended for costume events and editorial wear.
Diameter
14.20 mm standard and 14.50 mm scleral, both for full iris coverage.
Surface
Special Invert Padding Technology with FDA-approved medical-grade pigments.
Replacement
Monthly.
Packaging
2 lenses per box.
Proclear multifocal
MultifocalMonthly
BC8.7
Dia14.4
Dk27
H₂O62%
Power+6.00 to -8.00
Power Range
+6.00 to -8.00
Modulus
0.63 MPa
CT @ −3.00D
0.16mm
Extended Wear
No
Material
omafilcon B
HydrogelNon-ionic
Available Powers
SPH: +6.00D to -8.00D (0.50D steps after -6.50D)
ADD: +1.00, +1.50, +2.00, +2.50
Extended parameters available in XR.
Design Notes
Optics
Balance Progressive, two different optical designs optimized for each sphere and add power, with a center D or center N lens chosen for each eye.
Material
Phosphorylcholine (PC) molecules held in the lens material bind with water molecules in natural tears to create a shield of water around the lens.
Initial Fitting Guide
| Spectacle Add | Dominant Eye | Non-Dominant Eye |
|---|---|---|
| +0.75D to +1.25D | +1.50 D | +1.50 D |
| +1.50D to +1.75D | +1.50 D | +1.50 N |
| +2.00D to +2.25D | +2.00 D | +2.00 N |
| +2.50D or above | +2.50 D | +2.50 N |
Troubleshooting
| Complaint | Action |
|---|---|
| Poor distance | Add ±0.25D (up to ±0.50D) to the eye that needs improvement. |
| Poor near | Add ±0.25D (up to ±0.50D) to the eye that needs improvement. |
Proclear multifocal toric
Toric MFMonthly
BC8.4, 8.8
Dia14.4
Dk27
H₂O62%
Power+20.00 to -20.00
Power Range
+20.00 to -20.00
Modulus
0.63 MPa
CT @ −3.00D
0.11mm
Extended Wear
No
Material
omafilcon B
HydrogelNon-ionic
Available Powers
SPH: -20.00 to +20.00 (±0.50 steps after ±6.50D)
CYL: -0.75 to -5.75 in 0.50D steps
AXS: Full circle in 5° steps
ADD: +1.00D, +1.50D, +2.00D, +2.50D, +3.00D, +3.50D, +4.00D
Design Notes
Availability
Revenue discontinued November 1, 2026.
Study
Satisfaction 76% versus 6% favoring Biofinity toric multifocal over Proclear multifocal toric in a non-dispensing, subject masked, randomized, bilateral, cross-over short-term evaluation, n=17; comfort at 2-week follow-up 80.9±21.6 versus 73.0±25.0 in a separate 2-week dispensing crossover, n=24.
Initial Fitting Guide
| Spectacle Add | Dominant Eye | Non-Dominant Eye |
|---|---|---|
| +0.75D to +1.25D | +1.50 D | +1.50 D |
| +1.50D to +1.75D | +1.50 D | +1.50 N |
| +2.00D to +2.25D | +2.00 D | +2.00 N |
| +2.50D to +2.75D | +2.50 D | +2.50 N |
| +3.00D to +3.25D | +3.00 D | +3.00 N |
| +3.50D to +3.75D | +3.50 D | +3.50 N |
| +4.00D to +4.25D | +4.00 D | +4.00 N |
Troubleshooting
| Complaint | Action |
|---|---|
| Poor distance | Add ±0.25D (up to ±0.50D) to the eye that needs improvement. |
| Poor near | Add ±0.25D (up to ±0.50D) to the eye that needs improvement. |
Proclear sphere
SphereMonthly
BC8.2, 8.6
Dia14.2
Dk27
H₂O62%
Power+20.00 to -20.00
Power Range
+20.00 to -20.00
Modulus
0.63 MPa
CT @ −3.00D
0.065mm
Extended Wear
No
Material
omafilcon B
HydrogelNon-ionic
Available Powers
8.2/14.2: -10.00 to -0.25 (0.50D steps after -6.00)
8.6/14.2: -20.00 to +20.00 (plano excluded, 0.50D steps ±6.00D)
Design Notes
Material
Phosphorylcholine (PC) molecules held in the lens material bind with water molecules in natural tears to create a shield of water around the lens.
Note
Hydration holds at 96% throughout the day.
Proclear toric
ToricMonthly
BC8.4, 8.8
Dia14.4
Dk27
H₂O62%
Power+6.00 to -8.00
Power Range
+6.00 to -8.00
Modulus
0.63 MPa
CT @ −3.00D
0.11mm
Extended Wear
No
Material
omafilcon B
HydrogelNon-ionic
Available Powers
SPH: +6.00D to -8.00D (0.50D steps after -6.50D)
CYL: -0.75, -1.25, -1.75, -2.25
AXS: Full circle (10° steps)
Design Notes
Material
Phosphorylcholine (PC) molecules held in the lens material bind with water molecules in natural tears to create a shield of water around the lens.
Note
Over 45,000 parameters are available across the Proclear toric range.
Proclear XR multifocal
MultifocalMonthly
BC8.4, 8.7
Dia14.4
Dk27
H₂O62%
Power+20.00 to -20.00
Power Range
+20.00 to -20.00
Modulus
0.63 MPa
CT @ −3.00D
.16mm
Extended Wear
No
Material
omafilcon B
HydrogelNon-ionic
Available Powers
B.C.: 8.7
DIA: 14.4
SPH: +6.25D to +20.00D (0.50D steps after +6.50D)
ADD: +1.00, +1.50, +2.00, +2.50
B.C.: 8.7
DIA: 14.4
SPH: -8.50D to -20.00D (0.50D steps after +/-6.50D)
ADD: +3.00, +3.50, +4.00
B.C.: 8.4
DIA: 14.4
SPH: +20.00D to -20.00D (0.50D steps after +/-6.50D)
ADD: +1.00, +1.50, +2.00, +2.50, +3.00, +3.50, +4.00
Design Notes
Optics
Balance Progressive, two different optical designs optimized for each sphere and add power, with a center D or center N lens chosen for each eye.
Material
Phosphorylcholine (PC) molecules held in the lens material bind with water molecules in natural tears to create a shield of water around the lens.
Availability
Trial lenses discontinued November 1, 2025; revenue packs discontinued November 1, 2026.
Initial Fitting Guide
| Spectacle Add | Dominant Eye | Non-Dominant Eye |
|---|---|---|
| +0.75D to +1.25D | +1.50 D | +1.50 D |
| +1.50D to +1.75D | +1.50 D | +1.50 N |
| +2.00D to +2.25D | +2.00 D | +2.00 N |
| +2.50D to +2.75D | +2.50 D | +2.50 N |
| +3.00D to +3.25D | +3.00 D | +3.00 N |
| +3.50D to +3.75D | +3.50 D | +3.50 N |
| +4.00D to +4.25D | +4.00 D | +4.00 N |
Troubleshooting
| Complaint | Action |
|---|---|
| Poor distance | Add ±0.25D (up to ±0.50D) to the eye that needs improvement. |
| Poor near | Add ±0.25D (up to ±0.50D) to the eye that needs improvement. |
Proclear XR toric
ToricMonthly
BC8.4, 8.8
Dia14.4
Dk27
H₂O62%
Power+10.00 to -10.00
Power Range
+10.00 to -10.00
Modulus
0.63 MPa
CT @ −3.00D
0.11mm
Extended Wear
No
Material
omafilcon B
HydrogelNon-ionic
Available Powers
Low Cyl XR
SPH: +6.25D to +10.00D (0.50D steps after +6.50D) and -8.50D to -10.00D (0.50D steps)
CYL: -0.75, -1.25, -1.75, -2.25
AXS: Full circle (5° steps)
High Cyl XR
SPH: +10.00D to -10.00D (0.50D steps after ±6.50D)
CYL:-2.75 to -5.75 (0.50D steps)
AXS: Full circle (5° steps)
Design Notes
Material
Phosphorylcholine (PC) molecules held in the lens material bind with water molecules in natural tears to create a shield of water around the lens.
Note
Over 45,000 parameters are available across the Proclear toric range.
PureVision
SphereMonthly
BC8.3, 8.6
Dia14.0
Dk91
H₂O36%
Power+6.00 to -12.00
Power Range
+6.00 to -12.00
Modulus
1.1 MPa
CT @ −3.00D
0.09mm
Extended Wear
1 Month
Material
balafilcon A
IonicSilicone Hydrogel
Available Powers
8.6 B.C.: +6.00D to -12.00D (0.50D steps after -6.00D)
8.3 B.C.: -0.25D to -6.00D
Design Notes
Material
Balafilcon A, a copolymer of a silicone vinyl carbamate, N-vinyl-pyrrolidone, a siloxane crosslinker and a vinyl alanine wetting monomer.
Surface
Performa surface treatment, which transforms hydrophobic silicone to hydrophilic silicate.
Visibility tint
Blue, from up to 300 ppm of Reactive Blue Dye 246.
Indication
Also indicated for therapeutic use as a bandage lens for corneal protection and corneal pain relief during treatment of ocular pathologies and post-surgical conditions.
Study
Visual acuity of 20/20 or better in 87% of measurements through a 12-month continuous wear trial, among the 610 subjects who completed it.
PureVision 2
SphereMonthly
BC8.6
Dia14.0
Dk91
H₂O36%
Power+6.00 to -12.00
Power Range
+6.00 to -12.00
Modulus
1.1 MPa
CT @ −3.00D
.07mm
Extended Wear
1 Month
Material
balafilcon A
IonicSilicone Hydrogel
Available Powers
+6.00D to -12.00D (0.50D steps after -6.00D)
Design Notes
Material
Balafilcon A, a copolymer of a silicone vinyl carbamate, N-vinyl-pyrrolidone, a siloxane crosslinker and a vinyl alanine wetting monomer.
Surface
Performa surface treatment, which transforms hydrophobic silicone to hydrophilic silicate.
Visibility tint
Blue, from up to 300 ppm of Reactive Blue Dye 246.
Indication
Also indicated for therapeutic use as a bandage lens for corneal protection and corneal pain relief during treatment of ocular pathologies and post-surgical conditions.
Note
The clinical results published for this lens were obtained with the PureVision contact lens, which has the same lens material but a different lens design.
PureVision 2 for Astigmatism
ToricMonthly
BC8.9
Dia14.5
Dk91
H₂O36%
Power+6.00 to -9.00
Power Range
+6.00 to -9.00
Modulus
1.1 MPa
CT @ −3.00D
0.10mm
Extended Wear
1 Month
Material
balafilcon A
IonicSilicone Hydrogel
Available Powers
SPH: +6.00D to -9.00D (0.50 steps over -6.00)
CYL: -0.75D, -1.25D, -1.75D, -2.25D
AXS: 10º full circle
Design Notes
Optics
Aspheric optical surfaces intended to reduce the population average spherical aberration across all sphere, cylinder, and axis combinations.
Stabilization
Auto Align Design, a hybrid ballasting geometry that optimizes thickness from apex to base of the lens, with 1 guide mark in the lens perimeter at 6 o'clock as a reference for judging rotation.
Geometry
A smooth rounded profile, for movement over the conjunctival tissue.
Material
Balafilcon A, a copolymer of a silicone vinyl carbamate, N-vinyl-pyrrolidone, a siloxane crosslinker and a vinyl alanine wetting monomer.
Surface
Performa surface treatment, which transforms hydrophobic silicone to hydrophilic silicate.
Visibility tint
Blue, from up to 300 ppm of Reactive Blue Dye 246.
Note
The clinical results published for this lens were obtained with the PureVision contact lens, which has the same lens material but a different lens design.
PureVision Multi-Focal
MultifocalMonthly
BC8.6
Dia14.0
Dk91
H₂O36%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
1.1 MPa
CT @ −3.00D
.09mm
Extended Wear
1 Month
Material
balafilcon A
IonicSilicone Hydrogel
Available Powers
+6.00D to -10.00D
Design Notes
Optics
Front surface asphere consisting of multiple aspheric zones over a spherical base curve, with the most plus power in the center of the lens progressing to more minus in the periphery.
Add
Two strengths, Low +0.75D to +1.50D and High +1.75D to +2.50D.
Material
Balafilcon A, a copolymer of a silicone vinyl carbamate, N-vinyl-pyrrolidone, a siloxane crosslinker and a vinyl alanine wetting monomer.
Surface
Performa surface treatment, which transforms hydrophobic silicone to hydrophilic silicate.
Visibility tint
Blue, from up to 300 ppm of Reactive Blue Dye 246.
Note
The clinical results published for this lens were obtained with the PureVision contact lens, which has the same lens material but a different lens design.
Initial Fitting Guide
| Spectacle Add | Lens Selection |
|---|---|
| Up to +1.25D | LOW OU |
| +1.50D to +1.75D | HIGH OU with -0.25D/-0.50D over the distance power |
| +2.00D or above | HIGH OU |
PureVision2 Multi-Focal
MultifocalMonthly
BC8.6
Dia14.0
Dk91
H₂O36%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
1.1 MPa
CT @ −3.00D
0.07mm
Extended Wear
1 Month
Material
balafilcon A
IonicSilicone Hydrogel
Available Powers
+6.00D to -10.00D (0.25D steps)
Design Notes
Optics
Front surface asphere consisting of multiple aspheric zones over a spherical base curve, with the most plus power in the center of the lens progressing to more minus in the periphery.
Add
Two strengths, Low +0.75D to +1.50D and High +1.75D to +2.50D.
Material
Balafilcon A, a copolymer of a silicone vinyl carbamate, N-vinyl-pyrrolidone, a siloxane crosslinker and a vinyl alanine wetting monomer.
Surface
Performa surface treatment, which transforms hydrophobic silicone to hydrophilic silicate.
Visibility tint
Blue, from up to 300 ppm of Reactive Blue Dye 246.
Note
The clinical results published for this lens were obtained with the PureVision contact lens, which has the same lens material but a different lens design.
Initial Fitting Guide
| Spectacle Add | Lens Selection |
|---|---|
| +0.75D to +1.50D | LOW OU |
| +1.75D to +2.50D | HIGH OU |
Troubleshooting — Poor Near
| Condition | Action |
|---|---|
| Wearing two LOW | Replace Non-Dom with HIGH. If still poor, add +0.25D to Non-Dom. |
| Wearing two HIGH | Add +0.25D to Non-Dom. |
Troubleshooting — Poor Distance
| Condition | Action |
|---|---|
| Wearing two LOW | Replace Dom with single vision lens. |
| Wearing two HIGH | Replace Dom with LOW. |
Soflens 38
SphereMonthly
BC8.4, 8.7, 9.0
Dia14.0
Dk8
H₂O38.6%
Power+4.00 to -9.00
Power Range
+4.00 to -9.00
Modulus
0.8 MPa
CT @ −3.00D
.035mm
Extended Wear
1 Week
Material
polymacon
HydrogelNon-ionic
Available Powers
+4.00D to -9.00D (excludes plano)
Design Notes
Optics
Spherical single vision, supplied as a hemispherical shell.
Material
Polymacon, a hydrophilic polymer of 2-hydroxyethyl methacrylate.
Base curve
Three fits, labeled steep, medium and flat, the steeper selected when the lens moves or decenters excessively and the flatter when movement is insufficient.
Visibility tint
Blue, from up to 100 ppm of Reactive Blue Dye 246.
Note
The apparent blue color may decrease slightly following repeated disinfection, without affecting the safety or performance of the lens.
TOTAL30
SphereMonthly
BC8.4
Dia14.2
Dk123
H₂O55%
Power+8.00 to -12.00
Power Range
+8.00 to -12.00
Modulus
0.6 MPa
CT @ −3.00D
.08mm
Extended Wear
No
Material
lehfilcon A
UV Blocking
Class 1
Non-ionicSilicone Hydrogel
Available Powers
+8.00D to -12.00D (plano excluded, o.50D steps after +6.00D and -8.00D)
Design Notes
Material
Water gradient construction, water content rising from the core outward to a surface that approaches 100% water.
Surface
CELLIGENT Technology, which includes a bioinspired 2-methacryloyloxyethyl phosphorylcholine polymer surface, helps resist the adherence of bacteria and lipids, based on in vitro studies of unworn lenses.
Note
A blue-violet light filter reduces 34% of light below 450 nm, a reduction with no demonstrated clinical benefit.
TOTAL30 for Astigmatism
ToricMonthly
BC8.6
Dia14.5
Dk123
H₂O55%
Power+8.00 to -10.00
Power Range
+8.00 to -10.00
Modulus
0.6 MPa
CT @ −3.00D
0.1mm
Extended Wear
No
Material
lehfilcon A
UV Blocking
Class 1
Non-ionicSilicone Hydrogel
Available Powers
SPH: +8.00D to -10.00D (0.50D steps after ±6.00D)
CYL: -0.75, -1.25, -1.75, -2.25, -2.75
AXS: 10° full circle
Design Notes
| Stabilization: PRECISION BALANCE 8 | 4 design, stabilized at the 8 and 4 o'clock points to reduce lower lid interaction, with a single 6 o'clock scribe mark. |
|---|---|
| Study: In a clinical trial where n=69, the lens settled within 3 degrees of ideal orientation, took an average of 60 seconds to settle, oscillated less than 3 degrees with blink, and gave 95% first-lens fit success judged on lens movement, centration and rotation at initial fitting. | |
| Material: Water gradient construction, water content rising from the core outward to a surface that approaches 100% water. | |
| Surface: CELLIGENT Technology, which includes a bioinspired 2-methacryloyloxyethyl phosphorylcholine polymer surface, helps resist the adherence of bacteria and lipids, based on in vitro studies of unworn lenses. | |
| Note: A blue-violet light filter reduces 34% of light below 450 nm, a reduction with no demonstrated clinical benefit. |
TOTAL30 Multifocal
MultifocalMonthly
BC8.4
Dia14.2
Dk123
H₂O55%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
0.6 MPa
CT @ −3.00D
.08mm
Extended Wear
1 Month
Material
lehfilcon A
UV Blocking
Class 1
Non-ionicSilicone Hydrogel
Available Powers
+6.00 to -10.00D (0.25D steps)
Design Notes
Optics
PRECISION PROFILE center-near design, near at the central zone, intermediate mid-peripherally and distance at the outer zone, with a smooth progression of power gradients between them.
Add
Three add powers, low (LO), medium (MED) and high (HI).
Material
Water gradient construction, water content rising from the core outward to a surface that approaches 100% water.
Surface
CELLIGENT Technology, which includes a bioinspired 2-methacryloyloxyethyl phosphorylcholine polymer surface, helps resist the adherence of bacteria and lipids, based on in vitro studies of unworn lenses.
Handling tint
Light blue-green.
Note
A blue-violet light filter reduces 34% of light below 450 nm, a reduction with no demonstrated clinical benefit.
Initial Fitting Guide
Start with a same-day spectacle Rx. Add +0.25D to the most plus vertex-corrected spherical equivalent Rx for each eye.
| Spectacle Add | Lens Selection |
|---|---|
| Up to +1.25D | LO OU |
| +1.50D to +2.00D | MED OU |
| +2.25D to +2.50D | HI OU |
Allow 5-10 minutes of real-world exposure before assessment.
Troubleshooting — Poor Near (Step 1)
Over-refract Non-Dom with same add + additional +0.50D.
| Spectacle Add | Dominant Eye | Non-Dominant Eye |
|---|---|---|
| Up to +1.25D | LO | LO + additional +0.50D |
| +1.50D to +2.00D | MED | MED + additional +0.50D |
| +2.25D to +2.50D | HI | HI + additional +0.50D |
Troubleshooting — Poor Near (Step 2)
Move both eyes up one add level.
| Spectacle Add | Dominant Eye | Non-Dominant Eye |
|---|---|---|
| Up to +1.25D | MED | MED |
| +1.50D to +2.00D | MED | HI |
| +2.25D to +2.50D | HI | HI |
Troubleshooting — Poor Distance
Lower Dom eye add.
| Spectacle Add | Dominant Eye | Non-Dominant Eye |
|---|---|---|
| +1.50D to +2.00D | LO | MED |
| +2.25D to +2.50D | LO | HI |
TOTAL30 Multifocal for Astigmatism
Toric MFMonthly
BC8.6
Dia14.5
Dk123
H₂O55%
Power+4.00 to -6.00
Power Range
+4.00 to -6.00
Modulus
0.6 MPa
CT @ −3.00D
0.1mm
Extended Wear
No
Material
lehfilcon A
UV Blocking
Class 1
Non-ionicSilicone Hydrogel
Available Powers
SPH: -6.00D to +4.00D (0.25D steps)
CYL: -0.75D, -1.25D, -1.75D
AXS: 10° to 180° (10° steps)
ADD: LO (1.25), MED (2.00), HI (2.50)
Design Notes
Surface
Water Gradient and CELLIGENT technology give a biomimetic surface that helps resist bacteria and lipid deposits, based on in vitro studies on unworn lenses.
Note
Blue-Violet Light filtration acts on visible light, not ultraviolet, and filtering of high-energy visible (HEV) light by contact lenses has not been demonstrated to confer any health benefit to the user, including retinal protection or reduced eye strain.
Fitting
Sphere powers run -6.00D to +4.00D in 0.25D steps, with cylinders of -0.75D, -1.25D and -1.75D and axes 10° to 180° in 10° steps, a range covering about 90% of astigmatic presbyopes.
Add
Three add steps, LO (1.25), MED (2.00) and HI (2.50).
Handling tint
VISITINT.
Packaging
6 count revenue pack, 1 count trial packs.
Initial Fitting Guide
Use MyAlcon Fitting Hub or follow the guide below. Sphere, cylinder and axis come from the spectacle Rx; only the add level is selected.
Start with a same-day spectacle Rx. Add +0.25D to the most plus vertex-corrected spherical equivalent Rx for each eye.
| Spectacle Add | Lens Selection |
|---|---|
| Up to +1.25D | LO OU |
| +1.50D to +2.00D | MED OU |
| +2.25D to +2.50D | HI OU |
Allow 5-10 minutes of real-world exposure before assessment.
Troubleshooting — Poor Near (Step 1)
Over-refract Non-Dom with same add + additional +0.50D.
| Spectacle Add | Dominant Eye | Non-Dominant Eye |
|---|---|---|
| Up to +1.25D | LO | LO + additional +0.50D |
| +1.50D to +2.00D | MED | MED + additional +0.50D |
| +2.25D to +2.50D | HI | HI + additional +0.50D |
Troubleshooting — Poor Near (Step 2)
Move both eyes up one add level.
| Spectacle Add | Dominant Eye | Non-Dominant Eye |
|---|---|---|
| Up to +1.25D | MED | MED |
| +1.50D to +2.00D | MED | HI |
| +2.25D to +2.50D | HI | HI |
Troubleshooting — Poor Distance
Lower Dom eye add.
| Spectacle Add | Dominant Eye | Non-Dominant Eye |
|---|---|---|
| +1.50D to +2.00D | LO | MED |
| +2.25D to +2.50D | LO | HI |
ULTRA
SphereMonthly
BC8.5
Dia14.2
Dk114
H₂O46%
Power+6.00 to -12.00
Power Range
+6.00 to -12.00
Modulus
0.7 MPa
CT @ −3.00D
0.07mm
Extended Wear
1 Week
Material
samfilcon A
UV Blocking
None
Non-ionicSilicone Hydrogel
Available Powers
+6.00D to -12.00D (0.50D steps after -6.00D)
Design Notes
Optics
High-definition optics, carried by the single vision and toric lenses only, and directed at reducing halos and glare in low-light conditions.
Wetting agent
Polyvinylpyrrolidone (PVP), grown around and throughout the silicone backbone in the second phase of the MoistureSeal polymerization, where it attracts moisture.
ULTRA for Astigmatism
ToricMonthly
BC8.6
Dia14.5
Dk114
H₂O46%
Power+6.00 to -9.00
Power Range
+6.00 to -9.00
Modulus
0.7 MPa
CT @ −3.00D
0.10mm
Extended Wear
1 Week
Material
samfilcon A
UV Blocking
None
Non-ionicSilicone Hydrogel
Available Powers
SPH: +6.00D to -9.00D in 0.25D steps (0.50D steps after -6.00D)
CYL: -0.75D, -1.25D, -1.75D, -2.25D, -2.75D
AXS: 10˚ full circle
Design Notes
Optics
High-definition optics, carried by the single vision and toric lenses only, and directed at reducing halos and glare in low-light conditions.
Stabilization
OpticAlign design, ballasting in the lower hemisphere, with the orientation mark at 6 o'clock.
Study
Rotation at dispensing of 5 degrees or less in 94% of patients (n=157), in a 7-investigator, multi-site, 2-week study of current soft contact lens wearers.
Wetting agent
Polyvinylpyrrolidone (PVP), grown around and throughout the silicone backbone in the second phase of the MoistureSeal polymerization, where it attracts moisture.
ULTRA for Presbyopia
MultifocalMonthly
BC8.5
Dia14.2
Dk114
H₂O46%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
0.7 MPa
CT @ −3.00D
.07mm
Extended Wear
1 Week
Material
samfilcon A
UV Blocking
None
Non-ionicSilicone Hydrogel
Available Powers
+6.00D to -10.00D (includes plano, 0.25D steps)
Design Notes
Optics
3-Zone Progressive design, one plotted power curve with the near band beginning at the Y-axis, the intermediate band beginning just past the 1.0 mm tick and the distance band just past the 2.5 mm tick, plotted across 3.0 mm of radial displacement at -3.00D high add.
Optical design
Optimized for 7 biometrics: pupil size, anterior chamber depth, higher-order aberrations, axial length, corneal topography and diameter, residual accommodation across 9 distances, and subjective refraction.
Add
Two lens adds across the entire power range, selected from the spectacle add: Low for +0.75D to +1.50D and High for +1.75D to +2.50D.
Wetting agent
Polyvinylpyrrolidone (PVP), grown around and throughout the silicone backbone in the second phase of the MoistureSeal polymerization, where it attracts moisture.
Initial Fitting Guide
| Spectacle Add | Lens Selection |
|---|---|
| +0.75D to +1.50D | LOW OU |
| +1.75D to +2.50D | HIGH OU |
Troubleshooting — Poor Near
| Condition | Action |
|---|---|
| Wearing two LOW | Replace Non-Dom with HIGH. If still poor, add +0.25D to Non-Dom. |
| Wearing two HIGH | Add +0.25D to Non-Dom. |
Troubleshooting — Poor Distance
| Condition | Action |
|---|---|
| Wearing two LOW | Replace Dom with single vision lens. |
| Wearing two HIGH | Replace Dom with LOW. |
ULTRA Multifocal for Astigmatism
Toric MFMonthly
BC8.6
Dia14.5
Dk114
H₂O46%
Power+4.00 to -6.00
Power Range
+4.00 to -6.00
Modulus
0.7 MPa
CT @ −3.00D
0.11mm
Extended Wear
1 Week
Material
samfilcon A
UV Blocking
None
Non-ionicSilicone Hydrogel
Available Powers
SPH: +4.00 to -6.00 (includes plano)
Cylinder: -0.75D, -1.25D, -1.75D Available Axis: 10° Full circle
Cylinder: -2.25D, -2.75D
Available Axis: 10, 20, 70, 80, 90, 100, 110, 160, 170, 180 degrees
Design Notes
Optics
3-Zone Progressive design, one continuously descending power curve with the near zone at the lens center, the intermediate zone beginning just past the 1.0 mm tick and the distance zone just past the 2.5 mm tick, plotted across 3.0 mm of radial displacement at -3.00D high add.
Optical design
Optimized for 7 biometrics: pupil size, anterior chamber depth, higher-order aberrations, axial length, corneal topography and diameter, residual accommodation across 9 distances, and subjective refraction.
Add
Two lens adds across the entire power range, selected from the spectacle add: Low for +0.75D to +1.50D and High for +1.75D to +2.50D.
Stabilization
OpticAlign design, ballasting in the lower hemisphere, with the orientation mark at 6 o'clock.
Wetting agent
Polyvinylpyrrolidone (PVP), grown around and throughout the silicone backbone in the second phase of the MoistureSeal polymerization, where it attracts moisture.
Initial Fitting Guide
| Spectacle Add | Lens Selection |
|---|---|
| +0.75D to +1.50D | LOW OU |
| +1.75D to +2.50D | HIGH OU |
Troubleshooting — Poor Near
| Condition | Action |
|---|---|
| Wearing two LOW | Replace Non-Dom with HIGH. If still poor, add +0.25D to Non-Dom. |
| Wearing two HIGH | Add +0.25D to Non-Dom. |
Troubleshooting — Poor Distance
| Condition | Action |
|---|---|
| Wearing two LOW | Replace Dom with single vision lens. |
| Wearing two HIGH | Replace Dom with LOW. |