88 lenses
1-DAY ACUVUE DEFINE
ColorsSphereDaily
BC8.5
Dia14.2
Dk/t21
H₂O58%
Power+1.00 to -9.00
Power Range
+1.00 to -9.00
Modulus
0.31 MPa
CT @ −3.00D
.084mm
Extended Wear
No
Material
etafilcon A
HydrogelIonic
Available Powers
+1.00 to -9.00 (includes plano, 0.50D steps from +1.00 to -0.50 and -6.50 to -9.00)
1-DAY ACUVUE MOIST
SphereDaily
BC8.5, 9.0
Dia14.2
Dk/t21
H₂O58%
Power+6.00 to -12.00
Power Range
+6.00 to -12.00
Modulus
0.31 MPa
CT @ −3.00D
.084mm
Extended Wear
No
Material
etafilcon A
HydrogelIonic
Available Powers
-0.50D to -6.00D (0.25D steps)
-6.50D to -12.00D (0.50D steps)
+0.50D to +6.00D (0.25D steps)
1-DAY ACUVUE MOIST for ASTIGMATISM
ToricDaily
BC8.5
Dia14.5
Dk/t21
H₂O58%
Power+4.00 to -9.00
Power Range
+4.00 to -9.00
Modulus
0.31 MPa
CT @ −3.00D
.09mm
Extended Wear
No
Material
etafilcon A
HydrogelIonic
Available Powers
+4.00D to -6.00D (in 0.25D steps)
Cylinder: -0.75, -1.25, -1.75
Axis: 10° to 180° (in 10° steps)
Plano to -6.00D (in 0.25D steps)
Cylinder: -2.25
Axis: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180°
-6.50D to -9.00D (in 0.50D steps)
Cylinder: -0.75, -1.25, -1.75
Axis: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180°
1-DAY ACUVUE MOIST MULTIFOCAL
MultifocalDaily
BC8.4
Dia14.3
Dk/t21
H₂O58%
Power+6.00 to -9.00
Power Range
+6.00 to -9.00
Modulus
0.31 MPa
CT @ −3.00D
.084mm
Extended Wear
No
Material
etafilcon A
HydrogelIonic
Available Powers
SPH: -9.00D to +6.00D (in 0.25D steps)
ADD: LOW: +0.75D to +1.25D
MID: +1.50D to +1.75D
HIGH: +2.00D to +2.50D
Initial Fitting Guide
For a near add of +0.75D to +1.25D, use a "LOW" add power.
For a near add of +1.50D to +1.75D, use a "MID" add power.
For a near add of +2.00D to +2.50D, use a "HIGH" add power on the non-dominant eye and a "MID" add power on the dominant eye
1-Day ACUVUE TruEye
SphereDaily
BC8.5, 9.0
Dia14.2
Dk/t100
H₂O46%
Power+6.00 to -12.00
Power Range
+6.00 to -12.00
Modulus
0.66 MPa
CT @ −3.00D
0.07mm
Extended Wear
No
Material
narafilcon A
Non-ionicSilicone Hydrogel
Available Powers
-0.50D to -6.00D (0.25D steps)
-6.50D to -12.00D (0.50D steps)
+0.50D to +6.00D (0.25D steps)
ACUVUE 2
SphereBiweekly
BC8.3, 8.7
Dia14.0
Dk/t28
H₂O58%
Power+9.00 to -12.00
Power Range
+9.00 to -12.00
Modulus
0.31 MPa
CT @ −3.00D
.084mm
Extended Wear
1 Week
Material
etafilcon A
HydrogelIonic
Available Powers
-0.50D to -6.00D (in 0.25D steps)
-6.50D to -12.00D (in 0.50D steps)
+0.50D to +6.00D (in 0.25D steps)
+6.50D to +8.00D (in 0.50D steps)
ACUVUE OASYS
SphereBiweekly
BC8.4, 8.8
Dia14.0
Dk/t103
H₂O38%
Power+8.00 to -12.00
Power Range
+8.00 to -12.00
Modulus
0.72 MPa
CT @ −3.00D
.07mm
Extended Wear
1 Week
Material
senofilcon A
Non-ionicSilicone Hydrogel
Available Powers
Plano
-0.50D to -6.00D (in 0.25D steps)
-6.50D to -12.00D (in 0.50D steps)
+0.50D to +6.00D (in 0.25D steps)
+6.50D to +8.00D (in 0.50D steps)
ACUVUE OASYS 1-Day
SphereDaily
BC8.5, 9.0
Dia14.3
Dk/t103
H₂O38%
Power+8.00 to -12.00
Power Range
+8.00 to -12.00
Modulus
0.72 MPa
CT @ −3.00D
.085mm
Extended Wear
No
Material
senofilcon A
Non-ionicSilicone Hydrogel
Available Powers
+0.50D to +6.00D (0.25D steps)
+6.50D to +8.00D (0.50D steps)
-0.50D to -6.00D (0.25D steps)
-6.50D to -12.00D (0.50D steps)
ACUVUE OASYS 1-Day for ASTIGMATISM
ToricDaily
BC8.5
Dia14.3
Dk/t103
H₂O38%
Power+4.00 to -9.00
Power Range
+4.00 to -9.00
Modulus
0.72 MPa
CT @ −3.00D
.08mm
Extended Wear
No
Material
senofilcon A
Non-ionicSilicone Hydrogel
Available Powers
+4.00D to -6.00D (in 0.25D steps)
CYL: -0.75, -1.25, -1.75
Axis: 10° to 180° (in 10° steps)
CYL: -2.25
Axis: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180°
-6.50D to -9.00D (in 0.50D steps)
CYL: -0.75, -1.25, -1.75
Axis: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180°
ACUVUE OASYS for ASTIGMATISM
ToricBiweekly
BC8.6
Dia14.5
Dk/t103
H₂O38%
Power+6.00 to -9.00
Power Range
+6.00 to -9.00
Modulus
0.72 MPa
CT @ −3.00D
.08mm
Extended Wear
No
Material
senofilcon A
Non-ionicSilicone Hydrogel
Available Powers
Sphere (SPH)
-6.00D to +6.00D (in 0.25D steps)
-6.50D to -9.00D (in 0.50D steps)
Cylinder (CYL)
-0.75, -1.25, -1.75, -2.25, -2.75
Axis
10° to 180° (in 10° steps)
ACUVUE OASYS MAX 1-Day
SphereDaily
BC8.5, 9.0
Dia14.3
Dk/t103
H₂O38%
Power+8.00 to -12.00
Power Range
+8.00 to -12.00
Modulus
0.72 MPa
CT @ −3.00D
.085mm
Extended Wear
No
Material
senoflicon A
Non-ionicSilicone Hydrogel
Available Powers
+8.00D to -12.00D (includes PL, excludes ± 0.25D)
0.50D steps after ±6.00D
ACUVUE OASYS MAX 1-Day for ASTIGMATISM
ToricDaily
BC8.5
Dia14.3
Dk/t103
H₂O38%
Power+4.00 to -9.00
Power Range
+4.00 to -9.00
Modulus
0.72 MPa
CT @ −3.00D
.08mm
Extended Wear
No
Material
senofilcon a
Non-ionicSilicone Hydrogel
Available Powers
Plano to -6.00D (in 0.25D steps)
Cyl: -0.75, -1.25, -1.75
Axis: Full circle (10° steps)
Cyl: -2.25
Axis: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180°
-6.50D to -9.00D (in 0.50D steps)
Cyl: -0.75, -1.25, -1.75
Axis: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180°
+0.25D to +4.00D (in 0.25D steps)
Cyl: -0.75, -1.25, -1.75
Axis: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180°
ACUVUE OASYS MAX 1-Day MULTIFOCAL
MultifocalDaily
BC8.4
Dia14.3
Dk/t103
H₂O38%
Power+6.00 to -9.00
Power Range
+6.00 to -9.00
Modulus
0.72 MPa
CT @ −3.00D
.07mm
Extended Wear
No
Material
senofilcon A
Non-ionicSilicone Hydrogel
Available Powers
+6.00D to -9.00D (0.25D steps, LOW, MID, and HIGH Add)
Initial Fitting Guide
Use Acuvue simplifit calculator or follow the guidelines below:
ADD: +0.75 to +1.25 use a “LOW” near ADD lens on each eye
ADD: +1.50 to +1.75 use a “MID” near ADD lens on each eye
ADD: +2.00 to +2.50 use a “MID” near ADD on the dominant eye and a “HIGH” near ADD lens on the non-dominant eye
ACUVUE OASYS MAX 1-Day MULTIFOCAL for ASTIGMATISM
Toric MFDaily
BC8.5
Dia14.3
Dk/t103
H₂O38%
Power+6.00 to -9.00
Power Range
+6.00 to -9.00
Modulus
0.72 MPa
CT @ −3.00D
.08mm
Extended Wear
No
Material
senofilcon a
Non-ionicSilicone Hydrogel
Available Powers
Sph: -9.00D to +6.00D (0.25D steps)
Cyl: 1.00D (fits up to 1.75D)
Axis: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180°
Initial Fitting Guide
Use Acuvue simplifit calculator or follow the guidelines below:
ADD: +0.75 to +1.25 use a “LOW” near ADD lens on each eye
ADD: +1.50 to +1.75 use a “MID” near ADD lens on each eye
ADD: +2.00 to +2.50 use a “MID” near ADD on the dominant eye and a “HIGH” near ADD lens on the non-dominant eye
ACUVUE OASYS MULTIFOCAL
MultifocalBiweekly
BC8.4
Dia14.3
Dk/t103
H₂O38%
Power+6.00 to 9.00
Power Range
+6.00 to 9.00
Modulus
0.72 MPa
CT @ −3.00D
0.070mm
Extended Wear
1 Week
Material
senofilcon A
Non-ionicSilicone Hydrogel
Available Powers
+6.00D to -9.00D (0.25D steps, LOW, MID, and HIGH Add)
Initial Fitting Guide
Use Acuvue simplifit calculator or follow the guidelines below:
ADD: +0.75 to +1.25 use a “LOW” near ADD lens on each eye
ADD: +1.50 to +1.75 use a “MID” near ADD lens on each eye
ADD: +2.00 to +2.50 use a “MID” near ADD on the dominant eye and a “HIGH” near ADD lens on the non-dominant eye
ACUVUE OASYS with Transitions
SphereBiweekly
BC8.4, 8.8
Dia14.0
Dk/t103
H₂O38%
Power+0.00 to -12.00
Power Range
+0.00 to -12.00
Modulus
0.72 MPa
CT @ −3.00D
.085mm
Extended Wear
No
Material
senofilcon A
Non-ionicSilicone Hydrogel
Available Powers
Plano to -12.00D (0.50D steps after -6)
ACUVUE VITA
SphereMonthly
BC8.4, 8.8
Dia14.0
Dk/t103
H₂O41%
Power+8.00 to -12.00
Power Range
+8.00 to -12.00
Modulus
0.77 MPa
CT @ −3.00D
.07mm
Extended Wear
No
Material
senofilcon C
Non-ionicSilicone Hydrogel
Available Powers
+8.ooD to -12.00D (excludes Plano, 0.50D steps after ±6.00D)
ACUVUE VITA for ASTIGMATISM
ToricMonthly
BC8.6
Dia14.5
Dk/t103
H₂O41%
Power+4.00 to -9.00
Power Range
+4.00 to -9.00
Modulus
0.77 MPa
CT @ −3.00D
.08mm
Extended Wear
No
Material
senofilcon C
Non-ionicSilicone Hydrogel
Available Powers
Plano to -6.00D (0.25D steps)
CYL: -0.75, =1.25. -1.75
AXIS: 10° to 180° (10° increments)
CYL: -2.25
AXIS: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180°
-6.50D to -9.00D (0.50D steps)
CYL: -0.75, -1.25, -1.75
AXIS: 10°, 20°, 70°, 80°, 90", 100°, 110°, 160°, 170°, 180°
+0.25D to +4.00D (0.25D steps)
CYL: -0.75, -1.25, -1.75
AXIS: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180°
AIR OPTIX COLORS
ColorsSphereMonthly
BC8.6
Dia14.2
Dk/t110
H₂O33%
Power+6.00 to -8.00
Power Range
+6.00 to -8.00
Modulus
1.1 MPa
CT @ −3.00D
.08mm
Extended Wear
No
Material
lotrafilcon b
Non-ionicSilicone Hydrogel
Available Powers
Plano to ±6.00D (0.25D steps), -6.50D to -8.00D (-0.50D steps)
AIR OPTIX NIGHT & DAY AQUA
SphereMonthly
BC8.4, 8.6
Dia13.8
Dk/t140
H₂O24%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
1.5 MPa
CT @ −3.00D
.07mm
Extended Wear
1 Month
Material
lotrafilcon A
Non-ionicSilicone Hydrogel
Available Powers
+6.00D TO -10.00D (includes Plano, 0.50D steps after -8.50D)
AIR OPTIX plus HydraGlyde
SphereMonthly
BC8.6
Dia14.2
Dk/t110
H₂O33%
Power+8.00 to -12.00
Power Range
+8.00 to -12.00
Modulus
1.1 MPa
CT @ −3.00D
.08mm
Extended Wear
1 Week
Material
lotrafilcon B
Non-ionicSilicone Hydrogel
Available Powers
+8.00D to -12.00D (excludes Plano, 0.50D steps after +6.50D/-8.50D)
AIR OPTIX plus HydraGlyde for Astigmatism
ToricMonthly
BC8.7
Dia14.5
Dk/t110
H₂O33%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
1.1 MPa
CT @ −3.00D
0.102mm
Extended Wear
1 Week
Material
lotrafilcon B
Non-ionicSilicone Hydrogel
Available Powers
SPH: +6.00 to -10.00D (includes Plano, 0.50D steps after -6.00D)
CYL: Around the clock (10 degree steps)
AIR OPTIX plus HydraGlyde Multifocal
MultifocalMonthly
BC8.6
Dia14.2
Dk/t110
H₂O33%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
1.1 MPa
CT @ −3.00D
.08mm
Extended Wear
1 Week
Material
lotrafilcon b
Non-ionicSilicone Hydrogel
Available Powers
+6.00 D to -10.00 D (includes Plano, 0.25 D steps)
Initial Fitting Guide
Spectacle Add
Both Eyes
Up to +1.25
LOW Add
+1.50 to +2.00
MED Add
+2.25 to +2.50
HIGH Add
Troubleshooting:
Poor Near Vision Adjustment 1
SPECTACLE ADD
DOMINANT EYE
NON-DOMINANT EYE
Up to +1.25
LO
LO with additional +0.50
+1.50 to +2.00
MED
MED with additional +0.50
+2.25 to +2.50
HI
HI with additional +0.50
Poor Near Vision Adjustment 2
SPECTACLE ADD
DOMINANT EYE
NON-DOMINANT EYE
Up to +1.25
MED
MED
+1.50 to +2.00
MED
HI
+2.25 to +2.50
HI
MED
Poor Distance Vision Adjustment
SPECTACLE ADD
DOMINANT EYE
NON-DOMINANT EYE
+1.50 to +2.00
LO
MED
+2.25 to +2.50
HI
MED
BC8.4
Dia14.2
Dk/t90
H₂O55%
Power+8.00 to -12.00
Power Range
+8.00 to -12.00
Modulus
0.6 MPa
CT @ −3.00D
.08mm
Extended Wear
No
Material
fanfilcon A
Non-ionicSilicone Hydrogel
Available Powers
+8.00D to -12.00D (excludes Plano, 0.50D steps after +/- 6.00D)
BC8.5
Dia14.5
Dk/t90
H₂O55%
Power+8.00 to -10.00
Power Range
+8.00 to -10.00
Modulus
0.6 MPa
CT @ −3.00D
0.1mm
Extended Wear
No
Material
fanfilcon A
Non-ionicSilicone Hydrogel
Available Powers
SPH: +8.00D to -10.00D (0.50D steps after +/-6.00D)
CYL: -0.75D, -1.25D, -1.75D, -2.25D
AXS: Full circle (10 degree steps)
BC8.6
Dia14.0
Dk/t128
H₂O48%
Power+15.00 to -20.00
Power Range
+15.00 to -20.00
Modulus
0.75 MPa
CT @ −3.00D
.08mm
Extended Wear
1 Week
Material
comfilcon A
Non-ionicSilicone Hydrogel
Available Powers
+15.00D to -20.00D (0.50D steps after +/-6.00D, "XR" after +8 and -12.)
BC8.6
Dia14.0
Dk/t128
H₂O48%
Power+8.00 to -12.00
Power Range
+8.00 to -12.00
Modulus
0.75 MPa
CT @ −3.00D
.08mm
Extended Wear
1 Week
Material
comfilcon A
Non-ionicSilicone Hydrogel
Available Powers
+8.00D to -12.00D (0.50D steps after ±6.00D)
BC8.6
Dia14.0
Dk/t128
H₂O48%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
0.75 MPa
CT @ −3.00D
.09mm
Extended Wear
1 Week
Material
comfilcon A
Non-ionicSilicone Hydrogel
Available Powers
+6.00D to -10.00D (0.50D steps after -6.00D)
Initial Fitting Guide
Spectacle Add
Dominant Eye
Non-dominant Eye
+0.75, +1.00, +1.25
+1.50 D
+1.50 D
+1.50, +1.75
+1.50 D
+1.50 N
+2.00, +2.25
+2.00 D
+2.00 N
+2.50 or above
+2.50 D
+2.50 N
Or use the OptiExpert Fitting Calculator.
To improve distance vision add +/-0.25D (up to +/-0.50D) to the eye that needs improvement. To improve near vision add +/-0.25D (up to +/-0.50D) to the eye that needs improvement.
BC8.7
Dia14.5
Dk/t128
H₂O48%
Power+8.00 to -10.00
Power Range
+8.00 to -10.00
Modulus
0.75 MPa
CT @ −3.00D
0.11mm
Extended Wear
1 Week
Material
comfilcon A
Non-ionicSilicone Hydrogel
Available Powers
Sphere power: +8.00D to -10.00D (0.50D steps after +/-6.00D)
Cylinder power: -0.75, -1.25, -1.75, -2.25
Axis: 10° to 180° (10° steps)
BC8.7
Dia14.5
Dk/t128
H₂O48%
Power+10.00 to -10.00
Power Range
+10.00 to -10.00
Modulus
0.75 MPa
CT @ −3.00D
.09mm
Extended Wear
1 Week
Material
comfilcon A
Non-ionicSilicone Hydrogel
Available Powers
SPH: -10.00D to +10.00D (includes plano, 0.50D steps after ±6.00D)
CYL: -0.75D to -5.75D (0.50D steps)
AXS: Full circle (5º steps)
Initial Fitting Guide
Spectacle Add
Dominant Eye
Non-dominant Eye
+0.75, +1.00, +1.25
+1.00D
+1.00D
+1.50, +1.75
+1.50D
+1.50D
+2.00
+2.00D
+2.00N
+2.50 or above
+2.50D
+2.50N
BC8.7
Dia14.5
Dk/t128
H₂O48%
Power+20.00 to -20.00
Power Range
+20.00 to -20.00
Modulus
0.75 MPa
CT @ −3.00D
.11mm
Extended Wear
1 Week
Material
comfilcon a
Non-ionicSilicone Hydrogel
Available Powers
Sphere power: +8.50D to +20.00D and -10.50D to -20.00D (0.50D steps)
Cylinder power: -0.75, -1.25, -1.75, -2.25
Axis: 5° to 180° (5° steps)
Sphere power: +20.00D to -20.00D (0.50D steps after +/-6.00D)
Cylinder power: -2.75, -3.25, -3.75, -4.25, -4.75, -5.25, -5.75
Axis: 5° to 180° (in 5° steps)
BC8.6, 8.8, 8.9
Dia14.2
Dk/t19.6
H₂O55%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
0.4 MPa
CT @ −3.00D
0.07mm
Extended Wear
1 Week
Material
ocufilcon D
HydrogelIonic
Available Powers
Base Curve: 8.6, 8.9
Diameter: 14.2
Sphere Power Range: -0.25D to -10.00D (0.50D steps after -6.00D)
Base Curve: 8.8
Diameter: 14.2
Sphere Power Range: +0.25D to +6.00D (0.50D steps after +5.00D)
To be discontinued May 2026.
BC8.7
Dia14.5
Dk/t19.6
H₂O55%
Power+6.00 to -9.00
Power Range
+6.00 to -9.00
Modulus
0.4 MPa
CT @ −3.00D
0.11mm
Extended Wear
1 Week
Material
ocufilcon D
HydrogelIonic
Available Powers
SPH: +6.00D to -9.00D (0.50D steps after -6.00D and +5.00D)
CYL: -0.75, -1.25, -1.75, -2.25
AXS: Full circle (10° steps)
To be discontinued May 2026.
Biotrue ONEday
SphereDaily
BC8.6
Dia14.2
Dk/t42
H₂O78%
Power+6.00 to -12.00
Power Range
+6.00 to -12.00
Modulus
0.5 MPa
CT @ −3.00D
0.10mm
Extended Wear
No
Material
nesofilcon A
HydrogelNon-ionic
Available Powers
+6.00D to -12.00D (plano excluded, 0.50D steps over -6.00D)
Biotrue ONEday for Astigmatism
ToricDaily
BC8.4
Dia14.5
Dk/t42
H₂O78%
Power+4.00 to -9.00
Power Range
+4.00 to -9.00
Modulus
0.5 MPa
CT @ −3.00D
0.10mm
Extended Wear
No
Material
nesofilcon A
HydrogelNon-ionic
Available Powers
Plano to -6.00D (0.25D steps)
CYL: -0.75, -1.25, -1.75
AXS: Full circle in 10° steps
CYL: -2.25
AXS: Full circle excluding obliques (30, 40, 50, 60)
CYL: -2.75
AXS: 10°, 20°, 90°, 160°, 170°, 180°
-6.50D to -9.00D (0.50D steps)
CYL: -0.75, -1.25, -1.75
AXS: Full circle excluding obliques (30°, 40°, 50°)
CYL: -2.25
AXS: 10°, 20°, 90°, 160°, 170°, 180°
+0.25D to +4.00D (0.25D steps)
CYL: -0.75, -1.25, -1.75
AXS: 10°, 20°, 70° to 110°, 160° to 180°
CYL: -2.25
AXS: 10°, 20°, 80° to 100°, 160° to 180°
Biotrue ONEday for Presbyopia
MultifocalDaily
BC8.6
Dia14.2
Dk/t42
H₂O78%
Power+6.00 to -9.00
Power Range
+6.00 to -9.00
Modulus
0.5 MPa
CT @ −3.00D
0.10mm
Extended Wear
No
Material
nesofilcon A
HydrogelNon-ionic
Available Powers
+6.00D to -9.00D (includes plano, 0.25D steps)
Initial Fitting Guide
+0.75D to +1.50D (Spectacle Add)
Low Add OU
+1.75D to +2.50D (Spectacle Add)
High Add OU
Troubleshooting
Poor Near Vision
If wearing two Low Add lenses:
– Replace Non-Dominant Eye with High Add.
– If still unsatisfied, add +0.25D at a time to non-dominant eye (wearing High Add lens).
If wearing two High Add lenses:
– Add +0.25D to the non-dominant eye.
– If still unsatisfactory, add +0.25D at a time to non-dominant eye.
Poor Distance Vision
If wearing two Low Add lenses:
– Replace Dominant Eye with Single Vision lens.
– If still unsatisfactory, add -0.25D at a time to dominant eye (wearing Single Vision lens).
If wearing two High Add lenses:
– Replace Dominant Eye with Low Add.
– If still unsatisfactory, add -0.25D at a time to dominant eye (wearing Low Add lens).
BC8.6
Dia14.1
Dk/t60
H₂O56%
Power+8.00 to -10.00
Power Range
+8.00 to -10.00
Modulus
0.5 MPa
CT @ −3.00D
.07mm
Extended Wear
No
Material
somofilcon A
Non-ionicSilicone Hydrogel
Available Powers
+8.00D to -10.00D (plano excluded, 0.50D steps after ±6.00D)
BC8.6
Dia14.1
Dk/t60
H₂O56%
Power+5.00 to -6.00
Power Range
+5.00 to -6.00
Modulus
0.5 MPa
CT @ −3.00D
.07mm
Extended Wear
No
Material
somofilcon A
Non-ionicSilicone Hydrogel
Available Powers
+5.00D to -6.00D (0.25D steps)
Replaced by "3 Add" multifocal.
Initial Fitting Guide
Myopes / Emmetropes (+0.75 to +1.75D)
Spherical Equivalent (SE) Low Add OU
Myopes / Emmetropes (+2.00 to +2.25D)
SE Low Add (dominant), SE+0.50D Low Add (non-dominant)
Myopes / Emmetropes (+2.50D and up)
SE+0.25D Low Add (dominant), SE+0.25D High Add (non-dominant)
Hyperopes (+0.75 to +1.75D)
SE Low Add (dominant), SE+0.25D Low Add (non-dominant)
Hyperopes (+2.00 to +2.25D)
SE+0.25D Low Add OU
Hyperopes (+2.50D and up)
SE+0.25D Low Add (dominant), SE+0.25D High Add (non-dominant)
Troubleshooting:
To improve distance VA add +/-0.25D to the dominant eye
To improve near VA add +0.25D to the non-dominant eye
BC8.6
Dia14.1
Dk/t60
H₂O56%
Power+8.00 to -12.00
Power Range
+8.00 to -12.00
Modulus
0.5 MPa
CT @ −3.00D
.07mm
Extended Wear
No
Material
somofilcon A
Non-ionicSilicone Hydrogel
Available Powers
+8.00D to -12.00D (0.50D steps after -10D)
Initial Fitting Guide
Spectacle Rx Add
Dominant Eye
Non-Dominant Eye
+0.75D to +1.25D
LOW
LOW
+1.50D to +1.75D
LOW
MED
+2.00D to +2.50D
LOW
HIGH
Distance Vision Enhancement: Adjust Sphere Power of Dominant Eye ±0.25D
Near Vision Enhancement: Adjust Sphere Power of Non-Dominant Eye ±0.25D
Do not adjust add power.
Or use OptiExpert® Fitting calculator.
BC8.6
Dia14.3
Dk/t60
H₂O56%
Power+4.00 to -9.00
Power Range
+4.00 to -9.00
Modulus
0.5 MPa
CT @ −3.00D
.105mm
Extended Wear
No
Material
somofilcon A
Non-ionicSilicone Hydrogel
Available Powers
Plano to -6.00D (0.25D steps)
Cylinder: -0.75, -1.25, -1.75
Axis: 10°, 20°, 30°, 40°, 50°, 60°, 70°, 80°, 90°, 100°, 110°, 120°, 130°, 140°, 150°, 160°, 170°, 180°
Cylinder: -2.25
Axis: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180°
-6.50D to -9.00D (0.50D steps)
Cylinder: -0.75, -1.25, -1.75
Axis: 10°, 20°, 60°, 70°, 80°, 90°, 100°, 110°, 120°, 160°, 170°, 180°
Cylinder: -2.25
Axis: 10°, 20°, 90°, 160°, 170°, 180°
+0.25D to +4.00D (0.25D steps)
Cylinder: -0.75, -1.25, -1.75
Axis: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180°
DAILIES AquaComfort PLUS
SphereDaily
BC8.7
Dia14.0
Dk/t26
H₂O69%
Power+8.00 to -15.00
Power Range
+8.00 to -15.00
Modulus
0.76 MPa
CT @ −3.00D
0.10mm
Extended Wear
No
Material
nelfilcon A
HydrogelNon-ionic
Available Powers
+8.00D to -15.00D (0.50D steps after ±6.00D)
Trial Lenses Discontinued.
DAILIES AquaComfort PLUS Multifocal
MultifocalDaily
BC8.7
Dia14.0
Dk/t26
H₂O69%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
0.76 MPa
CT @ −3.00D
0.1mm
Extended Wear
No
Material
nelficon A
HydrogelNon-ionic
Available Powers
+6.00D to -10.00D (0.25D steps)
Initial Fitting Guide
Spectacle Add
Both Eyes
Up to +1.25
LOW Add
+1.50 to +2.00
MED Add
+2.25 to +2.50
HIGH Add
Troubleshooting:
Poor Near Vision Adjustment 1
SPECTACLE ADD
DOMINANT EYE
NON-DOMINANT EYE
Up to +1.25
LO
LO with additional +0.50
+1.50 to +2.00
MED
MED with additional +0.50
+2.25 to +2.50
HI
HI with additional +0.50
Poor Near Vision Adjustment 2
SPECTACLE ADD
DOMINANT EYE
NON-DOMINANT EYE
Up to +1.25
MED
MED
+1.50 to +2.00
MED
HI
+2.25 to +2.50
HI
MED
Poor Distance Vision Adjustment
SPECTACLE ADD
DOMINANT EYE
NON-DOMINANT EYE
+1.50 to +2.00
LO
MED
+2.25 to +2.50
HI
MED
DAILIES AquaComfort PLUS Toric
ToricDaily
BC8.8
Dia14.4
Dk/t17
H₂O69%
Power+4.00 to -8.00
Power Range
+4.00 to -8.00
Modulus
0.76 MPa
CT @ −3.00D
0.10mm
Extended Wear
No
Material
nelfilcon A
HydrogelNon-ionic
Available Powers
SPH: +4.00D to -8.00D (0.50 steps after -6.00D)
CYL: -0.75D, -1.25D, -1.75D
AXS: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180°
DAILIES COLORS
ColorsSphereDaily
BC8.6
Dia13.8
Dk/t26
H₂O69%
Power+0.00 to -8.00
Power Range
+0.00 to -8.00
Modulus
0.9 MPa
CT @ −3.00D
0.10mm
Extended Wear
No
Material
nelfilcon A
HydrogelNon-ionic
Available Powers
Plano to -8.00D (0.50D steps after -6.00D)
DAILIES TOTAL1
SphereDaily
BC8.5
Dia14.1
Dk/t140
H₂O33%
Power+6.00 to -12.00
Power Range
+6.00 to -12.00
Modulus
0.7 MPa
CT @ −3.00D
0.09mm
Extended Wear
No
Material
delefilcon A
Non-ionicSilicone Hydrogel
Available Powers
+6.00D to -12.00D (excludes plano and ±0.25D, 0.50D steps after -6.00D)
DAILIES TOTAL1 for Astigmatism
ToricDaily
BC8.6
Dia14.5
Dk/t140
H₂O33%
Power+4.00 to -8.00
Power Range
+4.00 to -8.00
Modulus
0.7 MPa
CT @ −3.00D
.09mm
Extended Wear
No
Material
delefilcon A
Non-ionicSilicone Hydrogel
Available Powers
+4.00D to +0.50D (0.25D steps)
Cylinder: -0.75D, -1.25D, -1.75D
Axis: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180°
Cylinder: -2.25D
Axis: 10°, 20°, 160°, 170°, 180°
Plano to -6.00D (0.25D steps)
Cylinder: -0.75D, -1.25D, -1.75D
Axis: Full circle in 10° steps
Cylinder: -2.25D
Axis: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180°
-6.50D to -8.00D (0.50D steps)
Cylinder: -0.75D, -1.25D, -1.75D
Axis: 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180°
Cylinder: -2.25D
Axis: 10°, 20°, 160°, 170°, 180°
DAILIES TOTAL1 Multifocal
MultifocalDaily
BC8.5
Dia14.1
Dk/t140
H₂O33%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
0.7 MPa
CT @ −3.00D
.09mm
Extended Wear
No
Material
delefilcon A
Non-ionicSilicone Hydrogel
Available Powers
+6.00D to -10.00D (in 0.25D steps)
Initial Fitting Guide
Spectacle Add
Both Eyes
Up to +1.25
LOW Add
+1.50 to +2.00
MED Add
+2.25 to +2.50
HIGH Add
Troubleshooting:
Poor Near Vision Adjustment 1
SPECTACLE ADD
DOMINANT EYE
NON-DOMINANT EYE
Up to +1.25
LO
LO with additional +0.50
+1.50 to +2.00
MED
MED with additional +0.50
+2.25 to +2.50
HI
HI with additional +0.50
Poor Near Vision Adjustment 2
SPECTACLE ADD
DOMINANT EYE
NON-DOMINANT EYE
Up to +1.25
MED
MED
+1.50 to +2.00
MED
HI
+2.25 to +2.50
HI
MED
Poor Distance Vision Adjustment
SPECTACLE ADD
DOMINANT EYE
NON-DOMINANT EYE
+1.50 to +2.00
LO
MED
+2.25 to +2.50
HI
MED
Focus DAILIES
SphereDaily
BC8.6
Dia13.8
Dk/t26
H₂O69%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
0.9 MPa
CT @ −3.00D
.1mm
Extended Wear
No
Material
nelfilcon A
HydrogelNon-ionic
Available Powers
+6.00D to -10.00D (excludes plano and ±0.25D, 0.50D steps after -6.00)
Freshlook COLORBLENDS
ColorsSphereBiweekly
BC8.6
Dia14.5
Dk/t16
H₂O55%
Power+6.00 to -8.00
Power Range
+6.00 to -8.00
Modulus
0.35 MPa
CT @ −3.00D
.08mm
Extended Wear
No
Material
phemfilcon A
HydrogelIonic
Available Powers
+6.00D to -8.00D (0.50D steps after +2.00 and -6.00)
Freshlook DIMENSIONS
ColorsSphereBiweekly
BC8.6
Dia14.5
Dk/t16
H₂O55%
Power+6.00 to -8.00
Power Range
+6.00 to -8.00
Modulus
0.35 MPa
CT @ −3.00D
.08mm
Extended Wear
No
Material
phemfilcon A
HydrogelIonic
Available Powers
+6.00D to -8.00D (0.50D steps over +2.00 and -6.00D)
Freshlook Handling Tint
ColorsSphereBiweekly
BC8.6
Dia14.5
Dk/t16
H₂O55%
Power+6.00 to -8.00
Power Range
+6.00 to -8.00
Modulus
0.35 MPa
CT @ −3.00D
.08mm
Extended Wear
No
Material
phemfilcon A
HydrogelIonic
Available Powers
+6.00 to -8.00 (0.50D steps after +2.00 and -6.00)
INFUSE Multifocal
MultifocalDaily
BC8.6
Dia14.2
Dk/t107
H₂O55%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
0.5 MPa
CT @ −3.00D
.08mm
Extended Wear
No
Material
kalifilcon A
Non-ionicSilicone Hydrogel
Available Powers
+6.00D to -10.00D (0.25D steps, plano included)
Initial Fitting Guide
+0.75D to +1.50D spectacle add
LOW ADD OU
+1.75D to +2.50D spectacle add
HIGH ADD OU
Troubleshooting
Poor Near Vision
If patient is wearing two Low Add lenses:
Replace Non-Dominant Eye with High Add.
If still unsatisfied, add +0.25D at a time to non-dominant eye (wearing High add lens).
If patient is wearing two High Add lenses:
Add +0.25D to the non-dominant eye.
If still unsatisfactory, add +0.25D at a time to non-dominant eye.
Poor Distance Vision
If patient is wearing two Low Add lenses:
Replace Dominant Eye with Single Vision lens.
If still unsatisfactory, add -0.25D at a time to dominant eye (wearing single vision lens).
If patient is wearing two High Add lenses:
Replace Dominant Eye with Low Add.
If still unsatisfactory, add -0.25D at a time to dominant eye (wearing Low Add).
INFUSE One-Day
SphereDaily
BC8.6
Dia14.2
Dk/t107
H₂O55%
Power+6.00 to -12.00
Power Range
+6.00 to -12.00
Modulus
0.5 MPa
CT @ −3.00D
.08mm
Extended Wear
No
Material
kalifilcon A
Non-ionicSilicone Hydrogel
Available Powers
+6.00 to -12.00D (0.50D steps after -6.00D)
Infuse One-Day for Astigmatism
ToricDaily
BC8.6
Dia14.5
Dk/t107
H₂O55%
Power+4.00 to -8.00
Power Range
+4.00 to -8.00
Modulus
0.5 MPa
CT @ −3.00D
0.1mm
Extended Wear
No
Material
kalifilcon A
Non-ionicSilicone Hydrogel
Available Powers
Plano to -6.00D:
-0.75D -1.25D, and -1.75D Cyl. in Axis 10° to 180°; -2.25D and -2.75D Cyl. in Axis 10°, 20°, 70° to 110°, and 160° to 180°
-6.50D to -8.00D (0.50D steps):
-0.75D, -1.25D, and -1.75D Cyl. in Axis 10°, 20°, 70° to 110°, and 160° to 180°
+0.25D to +4.00D:
-0.75D, -1.25D, and -1.75D Cyl. in Axis 10°, 20°, 70° to 110°, and 160° to 180°
BC8.7
Dia14.2
Dk/t25
H₂O60%
Power—
Modulus
0.4 MPa
CT @ −3.00D
.089mm
Extended Wear
No
Material
omafilcon A
HydrogelNon-ionic
Available Powers
-0.50D to -7.00D (0.50 steps after -6.00D)
BC8.4
Dia14.2
Dk/t80
H₂O54.3%
Power+8.00 to -12.00
Power Range
+8.00 to -12.00
Modulus
0.4 MPa
CT @ −3.00D
.08mm
Extended Wear
No
Material
stenfilcon A
Non-ionicSilicone Hydrogel
Available Powers
+8.00D to -12.00D (plano excluded, 0.50D steps after +5.00D and -6.00D)
BC8.4
Dia14.2
Dk/t80
H₂O54.3%
Power+8.00 to -12.00
Power Range
+8.00 to -12.00
Modulus
0.4 MPa
CT @ −3.00D
.08mm
Extended Wear
No
Material
stenfilcon A
Non-ionicSilicone Hydrogel
Available Powers
+8.00D to -12.00D (plano excluded, 0.50D steps after +5.00D and -6.00D)
BC8.4
Dia14.2
Dk/t80
H₂O54.3%
Power+8.00 to -12.00
Power Range
+8.00 to -12.00
Modulus
0.4 MPa
CT @ −3.00D
.08mm
Extended Wear
No
Material
stenfilcon A
Non-ionicSilicone Hydrogel
Available Powers
+8.00D to -12.00D (0.50D steps after -10.00)
Initial Fitting Guide
Spectacle Rx Add
Dominant Eye
Non-Dominant Eye
+0.75D to +1.25D
LOW
LOW
+1.50D to +1.75D
LOW
MED
+2.00D to +2.50D
LOW
MID
Determine dominant eye using +1.00D blur test.
Distance Vision Enhancement: Adjust Sphere Power of Dominant Eye ±0.25D
Near Vision Enhancement: Adjust Sphere Power of Non-Dominant Eye ±0.25D
Do not adjust add power.
Or use OptiExpert® Fitting calculator.
BC8.6
Dia14.5
Dk/t80
H₂O54.3%
Power+8.00 to -10.00
Power Range
+8.00 to -10.00
Modulus
0.4 MPa
CT @ −3.00D
.10mm
Extended Wear
No
Material
stenfilcon A
Non-ionicSilicone Hydrogel
Available Powers
SPH: +8.00D to -10.00D (0.50D steps after +/- 6.00D)
CYL: -0.75, -1.25, -1.75, -2.25
AXS: Full circle in 10˚ steps
PRECISION1
SphereDaily
BC8.3
Dia14.2
Dk/t90
H₂O51%
Power+8.00 to -12.00
Power Range
+8.00 to -12.00
Modulus
0.6 MPa
CT @ −3.00D
0.09mm
Extended Wear
No
Material
verofilcon A
Non-ionicSilicone Hydrogel
Available Powers
8.00 to -12.00 (0.50D steps after ±6.00)
PRECISION1 for Astigmatism
ToricDaily
BC8.5
Dia14.5
Dk/t90
H₂O51%
Power+4.00 to -8.00
Power Range
+4.00 to -8.00
Modulus
0.6 MPa
CT @ −3.00D
0.10mm
Extended Wear
No
Material
verofilcon A
Non-ionicSilicone Hydrogel
Available Powers
Plano to -6.00 (in 0.25 steps)
Cylinder: -0.75, -1.25, -1.75
Axis: Full circle in 10º steps
Cylinder: -2.25
Axis: 10º, 20º, 70º, 80º, 90º, 100º, 110º, 160º, 170º, and 180º
+0.25 to +4.00 (in 0.25 steps)
Cylinder: -0.75, -1.25, -1.75
Axis: 10º, 20º, 70º, 80º, 90º, 100º, 110º, 160º, 170º, and 180º
Cylinder: -2.25
Axis: 10º, 20º, 160º, 170º, and 180º
–6.50 to –8.00 (in 0.50 steps)
Cylinder: -0.75, -1.25, -1.75
Axis: 10º, 20º, 70º, 80º, 90º, 100º, 110º, 160º, 170º, and 180º
Cylinder: -2.25
Axis: 10º, 20º, 160º, 170º, and 180º
PRECISION7
SphereWeekly
BC8.4
Dia14.2
Dk/t119
H₂O55%
Power+8.00 to -12.00
Power Range
+8.00 to -12.00
Modulus
0.6 MPa
CT @ −3.00D
.08mm
Extended Wear
No
Material
serafilcon A
Non-ionicSilicone Hydrogel
Available Powers
+8.00D to -12.00D (0.50 D steps after ±6.00)
PRECISION7 for ASTIGMATISM
ToricWeekly
BC8.6
Dia14.5
Dk/t90
H₂O55%
Power+8.00 to -10.00
Power Range
+8.00 to -10.00
Modulus
0.6 MPa
CT @ −3.00D
.10mm
Extended Wear
1 Week
Material
serafilcon A
Non-ionicSilicone Hydrogel
Available Powers
SPH: +8.00D to -10.00D (0.50D steps after +6.00)
CYL: -0.75, -1.25, -1.75, -2.25
AXS: Full circle (10° degree steps)
BC8.7
Dia14.2
Dk/t25
H₂O60%
Power+8.00 to -12.00
Power Range
+8.00 to -12.00
Modulus
0.4 MPa
CT @ −3.00D
.09mm
Extended Wear
No
Material
omafilcon A
HydrogelNon-ionic
Available Powers
+8.00D to -12.00D (0.50D steps after -6.00D and +5.00D)
BC8.7
Dia14.2
Dk/t25
H₂O60%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
0.4 MPa
Extended Wear
No
Material
omafilcon A
HydrogelNon-ionic
Available Powers
+6.00D to -10.00D (0.50D steps after -6.00D)
Initial Fitting Guide
Dominant eye: Choose lens power based upon spherical equivalent from spectacle Rx, adjusted for vertex distance if necessary. Best performance may be achieved by adding +0.50D to the lens power.
Non-dominant eye: Choose lens with the recommended "near boost" power added to the distance Rx, per the patient's ADD requirements:
Patient's ADD
Near boost
(Non-dominant eye)
Up to +1.00
No near boost needed
+1.25 to +1.75
+0.75D
+2.00 to +2.50
+0.75D to +1.00D
Example refraction and lens choice:
Rx: -1.50 OU with +1.75 ADD
Dominant eye: -1.00
Non-dominant eye: -0.75
Optimizations tips:
To improve distance vision: Perform over-refraction in +/-0.25D steps to dominant eye under binocular conditions.
To improve near vision: Perform over-refraction in +0.25D steps to non-dominant eye under binocular conditions.
BC8.7
Dia14.4
Dk/t21
H₂O62%
Power+6.00 to -8.00
Power Range
+6.00 to -8.00
Modulus
0.63 MPa
CT @ −3.00D
0.16mm
Extended Wear
No
Material
omafilcon B
HydrogelNon-ionic
Available Powers
SPH: +6.00D to -8.00D (0.50D steps after -6.50D)
ADD: +1.00, +1.50, +2.00, +2.50
Extended parameters available in XR.
Initial Fitting Guide
Use the OptiExpert Calculator or follow the guide below:
Spectacle Add
Dominant Eye
Non-dominant Eye
+0.75, +1.00, +1.25
+1.50 D
+1.50 D
+1.50, +1.75
+1.50 D
+1.50 N
+2.00, +2.25
+2.00 D
+2.00 N
+2.50 or above
+2.50 D
+2.50 N
To improve distance vision add +/-0.25D (up to +/-0.50D) to the eye that needs improvement. To improve near vision add +/-0.25D (up to +/-0.50D) to the eye that needs improvement.
BC8.4, 8.8
Dia14.4
Dk/t21
H₂O62%
Power+20.00 to -20.00
Power Range
+20.00 to -20.00
Modulus
0.63 MPa
CT @ −3.00D
0.11mm
Extended Wear
No
Material
omafilcon B
HydrogelNon-ionic
Available Powers
SPH: -20.00 to +20.00 (±0.50 steps after ±6.50D)
CYL: -0.75 to -5.75 in 0.50D steps
AXS: Full circle in 5° steps
ADD: +1.00D, +1.50D, +2.00D, +2.50D, +3.00D, +3.50D, +4.00D
Initial Fitting Guide
Use the OptiExpert Calculator or follow the guide below:
ADD
Dominant Eye
Non-dominant Eye
+0.75, +1.00, +1.25
+1.50 D
+1.50 D
+1.50, +1.75
+1.50 D
+1.50 N
+2.00, +2.25
+2.00 D
+2.00 N
+2.50, +2.75
+2.50 D
+2.50 N
+3.00, +3.25
+3.00 D
+3.00 N
+3.50, +3.75
+3.50 D
+3.50 N
+4.00, +4.25
+4.00 D
+4.00 N
To improve distance vision add +/-0.25D (up to +/-0.50D) to the eye that needs improvement. To improve near vision add +/-0.25D (up to +/-0.50D) to the eye that needs improvement.
BC8.2, 8.6
Dia14.2
Dk/t21
H₂O62%
Power+20.00 to -20.00
Power Range
+20.00 to -20.00
Modulus
0.63 MPa
CT @ −3.00D
0.065mm
Extended Wear
No
Material
omafilcon B
HydrogelNon-ionic
Available Powers
8.2/14.2: -10.00 to -0.25 (0.50D steps after -6.00)
8.6/14.2: -20.00 to +20.00 (plano excluded, 0.50D steps ±6.00D)
BC8.4, 8.8
Dia14.4
Dk/t21
H₂O62%
Power+6.00 to -8.00
Power Range
+6.00 to -8.00
Modulus
0.63 MPa
CT @ −3.00D
0.11mm
Extended Wear
No
Material
omafilcon B
HydrogelNon-ionic
Available Powers
SPH: +6.00D to -8.00D (0.50D steps after -6.50D)
CYL: -0.75, -1.25, -1.75, -2.25
AXS: Full circle (10° steps)
BC8.4, 8.7
Dia14.4
Dk/t21
H₂O62%
Power+20.00 to -20.00
Power Range
+20.00 to -20.00
Modulus
0.63 MPa
CT @ −3.00D
.16mm
Extended Wear
No
Material
omafilcon B
HydrogelNon-ionic
Available Powers
B.C.: 8.7
DIA: 14.4
SPH: +6.25D to +20.00D (0.50D steps after +6.50D)
ADD: +1.00, +1.50, +2.00, +2.50
B.C.: 8.7
DIA: 14.4
SPH: -8.50D to -20.00D (0.50D steps after +/-6.50D)
ADD: +3.00, +3.50, +4.00
B.C.: 8.4
DIA: 14.4
SPH: +20.00D to -20.00D (0.50D steps after +/-6.50D)
ADD: +1.00, +1.50, +2.00, +2.50, +3.00, +3.50, +4.00
Initial Fitting Guide
Use the OptiExpert Calculator or follow the guide below:
ADD
Dominant Eye
Non-dominant Eye
+0.75, +1.00, +1.25
+1.50 D
+1.50 D
+1.50, +1.75
+1.50 D
+1.50 N
+2.00, +2.25
+2.00 D
+2.00 N
+2.50, +2.75
+2.50 D
+2.50 N
+3.00, +3.25
+3.00 D
+3.00 N
+3.50, +3.75
+3.50 D
+3.50 N
+4.00, +4.25
+4.00 D
+4.00 N
To improve distance vision add +/-0.25D (up to +/-0.50D) to the eye that needs improvement. To improve near vision add +/-0.25D (up to +/-0.50D) to the eye that needs improvement.
BC8.4, 8.8
Dia14.4
Dk/t21
H₂O62%
Power+10.00 to -10.00
Power Range
+10.00 to -10.00
Modulus
0.63 MPa
CT @ −3.00D
0.11mm
Extended Wear
No
Material
omafilcon B
HydrogelNon-ionic
Available Powers
Low Cyl XR
SPH: +6.25D to +10.00D (0.50D steps after +6.50D) and -8.50D to -10.00D (0.50D steps)
CYL: -0.75, -1.25, -1.75, -2.25
AXS: Full circle (5° steps)
High Cyl XR
SPH: +10.00D to -10.00D (0.50D steps after ±6.50D)
CYL:-2.75 to -5.75 (0.50D steps)
AXS: Full circle (5° steps)
PureVision
SphereMonthly
BC8.3, 8.6
Dia14.0
Dk/t91
H₂O36%
Power+6.00 to -12.00
Power Range
+6.00 to -12.00
Modulus
1.1 MPa
CT @ −3.00D
0.09mm
Extended Wear
1 Month
Material
balafilcon A
IonicSilicone Hydrogel
Available Powers
8.6 B.C.: +6.00D to -12.00D (0.50D steps after -6.00D)
8.3 B.C.: -0.25D to -6.00D
PureVision 2
SphereMonthly
BC8.6
Dia14.0
Dk/t91
H₂O36%
Power+6.00 to -12.00
Power Range
+6.00 to -12.00
Modulus
1.1 MPa
CT @ −3.00D
.07mm
Extended Wear
1 Month
Material
balafilcon A
IonicSilicone Hydrogel
Available Powers
+6.00D to -12.00D (0.50D steps after -6.00D)
PureVision 2 for Astigmatism
ToricMonthly
BC8.9
Dia14.5
Dk/t91
H₂O36%
Power+6.00 to -9.00
Power Range
+6.00 to -9.00
Modulus
1.1 MPa
CT @ −3.00D
0.10mm
Extended Wear
1 Month
Material
balafilcon A
IonicSilicone Hydrogel
Available Powers
SPH: +6.00D to -9.00D (0.50 steps over -6.00)
CYL: -0.75D, -1.25D, -1.75D, -2.25D
AXS: 10º full circle
PureVision Multi-Focal
MultifocalMonthly
BC8.6
Dia14.0
Dk/t91
H₂O36%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
1.1 MPa
CT @ −3.00D
.09mm
Extended Wear
1 Month
Material
balafilcon A
IonicSilicone Hydrogel
Available Powers
+6.00D to -10.00D
Initial Fitting Guide
Up to +1.25D Add: Low Add OU
+1.50D to +1.75 Add: High Add OU with -0.25D/-0.50D over the distance power
+2.00 Add or Higher: High Add OU
PureVision2 Multi-Focal
MultifocalMonthly
BC8.6
Dia14.0
Dk/t91
H₂O36%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
1.1 MPa
CT @ −3.00D
0.07mm
Extended Wear
1 Month
Material
balafilcon A
IonicSilicone Hydrogel
Available Powers
+6.00D to -10.00D (0.25D steps)
Initial Fitting Guide
+0.75D to +1.50D spectacle add: LOW ADD OU
+1.75D to +2.50D spectacle add: HIGH ADD OU
Troubleshooting Poor Near Vision
If patient is wearing two Low Add lenses:
Replace Non-Dominant Eye with High Add.
If still unsatisfied, add +0.25D at a time to non-dominant eye (wearing High add lens).
If patient is wearing two High Add lenses:
Add +0.25D to the non-dominant eye.
If still unsatisfactory, add +0.25D at a time to non-dominant eye.
Troubleshooting Poor Distance Vision
If patient is wearing two Low Add lenses:
Replace Dominant Eye with Single Vision lens.
If still unsatisfactory, add -0.25D at a time to dominant eye (wearing single vision lens).
If patient is wearing two High Add lenses:
Replace Dominant Eye with Low Add.
If still unsatisfactory, add -0.25D at a time to dominant eye (wearing Low Add).
Soflens 38
SphereMonthly
BC8.4, 8.7, 9.0
Dia14.0
Dk/t8.5
H₂O38.6%
Power+4.00 to -9.00
Power Range
+4.00 to -9.00
Modulus
0.8 MPa
CT @ −3.00D
.035mm
Extended Wear
No
Material
polymacon
HydrogelNon-ionic
Available Powers
+4.00D to -9.00D (excludes plano)
SofLens daily disposable
SphereDaily
BC8.6
Dia14.2
Dk/t22
H₂O59%
Power+6.50 to -9.00
Power Range
+6.50 to -9.00
Modulus
0.4 MPa
CT @ −3.00D
0.09mm
Extended Wear
No
Material
hilafilcon B
HydrogelNon-ionic
Available Powers
+6.50D to -9.00D (0.50D steps after -6.50D)
SofLens daily disposable for Astigmatism
ToricBiweekly
BC8.6
Dia14.2
Dk/t22
H₂O59%
Power+0.00 to -9.00
Power Range
+0.00 to -9.00
Modulus
0.4 MPa
CT @ −3.00D
.125mm
Extended Wear
No
Material
hilafilcon B
HydrogelNon-ionic
Available Powers
SPH: Plano to -9.00D
CYL: -0.75, -1.25, -1.75
AXS: 90º, 20º, 180º, 160º
SofLens Multifocal
MultifocalBiweekly
BC8.5, 8.8
Dia14.5
Dk/t8.5
H₂O38%
Power+6.00 to -7.00
Power Range
+6.00 to -7.00
Modulus
0.8 MPa
CT @ −3.00D
0.10mm
Extended Wear
No
Material
polymacon
HydrogelNon-ionic
Available Powers
+6.00D to -7.00D
Initial Fitting Guide
Spectacle Add +0.75 to +1.50D:
Lens Choice: Low ADD OU
Spectacle Add +1.75 to +2.50D:
Lens Choice: High ADD OU
Troubleshooting Poor Distance Vision
If patient is wearing two Low ADD lenses:
Add –0.25D to the dominant eye.
If patient is wearing two High ADD lenses:
Add –0.25D to the dominant eye.
Use a Low ADD in the dominant eye and a High ADD in the non-dominant eye.
Troubleshooting Poor Near Vision
If patient is wearing two Low ADD lenses:
Add +0.25D to the non-dominant eye.
Use a Low ADD in dominant eye and High ADD in non-dominant eye.
If near vision is still not acceptable, use High ADD in both eyes.
If patient is wearing two High ADD lenses:
Add +0.25D to non-dominant eye.
SofLens Toric
ToricBiweekly
BC8.5
Dia14.5
Dk/t32
H₂O66%
Power+6.00 to -9.00
Power Range
+6.00 to -9.00
Modulus
0.1 MPa
CT @ −3.00D
0.195mm
Extended Wear
1 Week
Material
alphafilcon A
Non-ionicSilicone Hydrogel
Available Powers
SPH: +6.00D to -9.00D (o.50 steps after -6.00)
CYL: -0.75, -1.25, -1.75, -2.25, -2.75 only available for Plano to -9.00D
AXS: 10º full
TOTAL30
SphereMonthly
BC8.4
Dia14.2
Dk/t123
H₂O55%
Power+8.00 to -12.00
Power Range
+8.00 to -12.00
Modulus
0.6 MPa
CT @ −3.00D
.08mm
Extended Wear
No
Material
lehfilcon A
Non-ionicSilicone Hydrogel
Available Powers
+8.00D to -12.00D (plano excluded, o.50D steps after +6.00D and -8.00D)
TOTAL30 for Astigmatism
ToricMonthly
BC8.6
Dia14.5
Dk/t123
H₂O55%
Power+8.00 to -10.00
Power Range
+8.00 to -10.00
Modulus
0.6 MPa
CT @ −3.00D
0.1mm
Extended Wear
No
Material
lehfilcon A
Non-ionicSilicone Hydrogel
Available Powers
SPH: +8.00D to -10.00D (0.50D steps after ±6.00D)
CYL: -0.75, -1.25, -1.75, -2.25
AXS: 10° full circle
TOTAL30 Multifocal
MultifocalMonthly
BC8.4
Dia14.2
Dk/t123
H₂O55%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
0.6 MPa
CT @ −3.00D
.08mm
Extended Wear
1 Month
Material
lehfilcon A
Non-ionicSilicone Hydrogel
Available Powers
+6.00 to -10.00D (0.25D steps)
Initial Fitting Guide
Fitting Instructions
Use the MyAlcon Fitting Hub or follow the instructions below:
Start with a same-day spectacle Rx for all new and refit patients.
Add +0.25D to the most plus vertex-corrected, spherical equivalent Rx for each eye to determine sphere.
Add power based on lowest acceptable add:
Up to 1.25 ADD = LO
+1.50 to +2.00 ADD = MED
+2.25 to +2.50 ADD = HI
ALLOW FOR 5-10 MINUTES of real-world exposure outside the exam room before assessing visual performance. Have the patient look outside and use their digital device while they are waiting.
With both eyes open, use hand-held lenses on each eye separately, by adding plus in 0.25D steps until the patient reports a decline in distance vision.
Verify over-refraction binocularly by having the patient look at distance and near objects through the hand-held lenses.
Keeping the ADD the same, apply new trial lenses based on the over-refraction results. If the patient’s vision is functional, dispense trial lenses for 5-7 days and schedule a follow-up visit.
Troubleshooting
Enhanced Near Vision
Step 4: To enhance near vision, determine the dominant eye by finding the lens with the greatest plus acceptance. For binocular vision, the non-dominant eye is the one that blurs least with a +1.50D lens.
Step 4A (Over-refraction)
For spectacle adds up to +2.50D, start with the recommended ADD power. To improve near vision, add a +0.50D lens to the non-dominant eye and have the patient assess their vision.
Spectacle ADD
Dominant Eye
Non-Dominant Eye (plus accepted)
Up to +1.25
LO
with additional +0.50
+1.50 to +2.00
MED
with additional +0.50
+2.25 to +2.50
HI
with additional +0.50
Step 4B (Adjusting ADD)
If near vision is still unsatisfactory after over-refraction, use the following guide.
Spectacle ADD
Dominant Eye
Non-Dominant Eye (plus accepted)
Up to +1.25
LO
MED
+1.50 to +2.00
MED
HI
+2.25 to +2.50
HI
HI
Note: If a patient's near vision is still poor with two high ADD lenses, a common reason is ghosting or poor image quality due to the high add power. Consider backing down to the MED ADD in one eye to see if that improves near vision.
Enhanced Distance Vision
Step 5: To improve distance vision, perform a spherical over-refraction to the dominant eye and adjust the ADD according to the chart below.
Spectacle ADD
Dominant Eye
Non-Dominant Eye (plus accepted)
+1.50 to +2.00
LO
MED
+2.25 to +2.50
LO
HI
ULTRA
SphereMonthly
BC8.5
Dia14.2
Dk/t114
H₂O46%
Power+6.00 to -12.00
Power Range
+6.00 to -12.00
Modulus
0.7 MPa
CT @ −3.00D
0.07mm
Extended Wear
1 Week
Material
samfilcon A
Non-ionicSilicone Hydrogel
Available Powers
+6.00D to -12.00D (0.50D steps after -6.00D)
ULTRA for Astigmatism
ToricMonthly
BC8.6
Dia14.5
Dk/t114
H₂O46%
Power+6.00 to -9.00
Power Range
+6.00 to -9.00
Modulus
0.7 MPa
CT @ −3.00D
0.07mm
Extended Wear
1 Week
Material
samfilcon A
Non-ionicSilicone Hydrogel
Available Powers
SPH: +6.00D to -9.00D in 0.25D steps (0.50D steps after -6.00D)
CYL: -0.75D, -1.25D, -1.75D, -2.25D, -2.75D
AXS: 10˚ full circle
ULTRA for Presbyopia
MultifocalMonthly
BC8.5
Dia14.2
Dk/t114
H₂O46%
Power+6.00 to -10.00
Power Range
+6.00 to -10.00
Modulus
0.7 MPa
CT @ −3.00D
.07mm
Extended Wear
1 Week
Material
samfilcon A
Non-ionicSilicone Hydrogel
Available Powers
+6.00D to -10.00D (includes plano, 0.25D steps)
Initial Fitting Guide
Initial Fitting
Use the Multifocal Fitting Calculator or see below:
Low OU: +0.75D to +1.50D (spectacle ADD)
High OU: +1.75D to +2.50D (spectacle ADD)
TO REFINE NEAR VISION
Wearing Two LOW ADDs:
Refinement 1: Replace the lens on the non-dominant eye with a HIGH ADD lens.
Refinement 2: If vision is still unsatisfactory, make small changes by adding +0.25D at a time to non-dominant eye (wearing High ADD lens) using hand-held lenses, and continue evaluating vision binocularly in normal room illumination. Adjust contact lens power when vision is satisfactory.
Wearing Two HIGH ADDs:
Refinement 1: Add +0.25D to the non-dominant eye.
Refinement 2: If vision is still unsatisfactory, make small changes by adding +0.25D at a time to non-dominant eye using hand-held lenses, and continue evaluating vision binocularly in normal room illumination. Adjust contact lens power when vision is satisfactory.
TO REFINE DISTANCE VISION
Wearing Two LOW ADDs:
Refinement 1: Replace the lens on the dominant eye with a single vision spherical lens.
Refinement 2: If vision is still unsatisfactory, make small changes by adding -0.25D at a time to dominant eye using hand-held lenses, and continue evaluating vision binocularly in normal room illumination. Adjust contact lens power when vision is satisfactory.
Wearing Two HIGH ADDs:
Refinement 1: Replace the lens on the dominant eye with a LOW ADD lens.
Refinement 2: If vision is still unsatisfactory, make small changes by adding -0.25D at a time to dominant eye (wearing Low ADD lens) using hand-held lenses, and continue evaluating vision binocularly in normal room illumination. Adjust contact lens power when vision is satisfactory.
ULTRA Multifocal for Astigmatism
Toric MFMonthly
BC8.6
Dia14.5
Dk/t114
H₂O46%
Power+4.00 to -6.00
Power Range
+4.00 to -6.00
Modulus
0.7 MPa
CT @ −3.00D
.07mm
Extended Wear
1 Week
Material
samfilcon A
Non-ionicSilicone Hydrogel
Available Powers
SPH: +4.00 to -6.00 (includes plano)
Cylinder: -0.75D, -1.25D, -1.75D Available Axis: 10° Full circle
Cylinder: -2.25D, -2.75D
Available Axis: 10, 20, 70, 80, 90, 100, 110, 160, 170, 180 degrees
Initial Fitting Guide
Initial Fitting
Use the Multifocal Fitting Calculator or see below:
Low OU: +0.75D to +1.50D (spectacle ADD)
High OU: +1.75D to +2.50D (spectacle ADD)
TO REFINE NEAR VISION
Wearing Two LOW ADDs:
Refinement 1: Replace the lens on the non-dominant eye with a HIGH ADD lens.
Refinement 2: If vision is still unsatisfactory, make small changes by adding +0.25D at a time to non-dominant eye (wearing High ADD lens) using hand-held lenses, and continue evaluating vision binocularly in normal room illumination. Adjust contact lens power when vision is satisfactory.
Wearing Two HIGH ADDs:
Refinement 1: Add +0.25D to the non-dominant eye.
Refinement 2: If vision is still unsatisfactory, make small changes by adding +0.25D at a time to non-dominant eye using hand-held lenses, and continue evaluating vision binocularly in normal room illumination. Adjust contact lens power when vision is satisfactory.
TO REFINE DISTANCE VISION
Wearing Two LOW ADDs:
Refinement 1: Replace the lens on the dominant eye with a single vision spherical lens.
Refinement 2: If vision is still unsatisfactory, make small changes by adding -0.25D at a time to dominant eye using hand-held lenses, and continue evaluating vision binocularly in normal room illumination. Adjust contact lens power when vision is satisfactory.
Wearing Two HIGH ADDs:
Refinement 1: Replace the lens on the dominant eye with a LOW ADD lens.
Refinement 2: If vision is still unsatisfactory, make small changes by adding -0.25D at a time to dominant eye (wearing Low ADD lens) using hand-held lenses, and continue evaluating vision binocularly in normal room illumination. Adjust contact lens power when vision is satisfactory.