OptiBlue Light Filter, which filters about 60% of blue-violet light; filtering of high-energy visible (HEV) light by contact lenses has not been demonstrated to confer any health benefit.

Pupil Optimized Design, with 100% of parameters optimized by age and refractive power.

Blink Stabilized Design, four stability zones that resist the effects of gravity, minimize lower-lid interaction, and deliver a prism-free optic zone, with horizontal and vertical symmetry so the lens cannot be inserted upside down.

Orientation marks are vertical single lines at 6 and 12 o'clock.

Invisible Edge Design, a thin tapered edge that reduces lens-lid interaction.

Poly(N-vinyl pyrrolidone) (PVP), which mimics key tear components.

Blue-green.

Balance Progressive Technology, two different optical designs, individualized for each wearer and eye by fitting a D lens or an N lens.

Optimized Toric Lens Geometry, a uniform horizontal thickness with a wide ballast band that orients the lens.

Aquaform Technology, which retains water from core to surface without a surface coating or added wetting agents in the lens material.

93% success on initial fitting using the fitting guide, in a subject masked, randomized, bilateral, cross-over evaluation of 27 wearers, astigmatic presbyopes at 2 sites in the UK and US.

Made to order, predominantly manufactured in Scottsville, N.Y., with most U.S. orders reaching customers within a week.

Revenue discontinued November 1, 2026.

Satisfaction 76% versus 6% favoring Biofinity toric multifocal over Proclear multifocal toric in a non-dispensing, subject masked, randomized, bilateral, cross-over short-term evaluation, n=17; comfort at 2-week follow-up 80.9±21.6 versus 73.0±25.0 in a separate 2-week dispensing crossover, n=24.

Four designs share one parameter envelope: sphere, toric, multifocal, and toric multifocal, each lathe-cut to order rather than held in stock.

Dual Elliptical Stabilization, a thin ballast that sets orientation and rotational stability on the toric and the toric multifocal.

Adaptive Tri-Zone Technology, a front-surface asphere carrying the most plus power centrally and progressing to more minus toward the periphery.

Central near zone ordered from 1.8 to 3.0 mm in 0.1 mm steps. Center thickness is published by power class rather than at the usual -3.00D reference: 0.10 mm for a low minus lens, up to 0.50 mm for a plus lens.

6.5 to 9.7 mm in 0.1 mm steps.

10.0 to 16.0 mm in 0.1 mm steps.

Three are orderable, all non-ionic. Hioxifilcon B (49% water, Dk 15) and hioxifilcon D (54% water, Dk 21) are hydrogels, each a copolymer of 2-hydroxyethyl methacrylate and glycerol methacrylate. Samfilcon B (41% water, Dk 126) is a silicone hydrogel, a copolymer of siloxane methacrylate and N-vinyl pyrrolidone. The figures on this card are hioxifilcon D's.

Blue. Hioxifilcon B and hioxifilcon D also come clear; samfilcon B is supplied tinted only.

Made to order, with most lenses delivered in 5 to 7 business days. The 120-day EZ-Exchange program remakes a lens to new parameters at no charge.

Cleared labeling is narrower than the ordering range. The package insert (Rev. 2024-07) lists spherical powers of +20.00D to -20.00D and add powers of +1.00D to +4.00D, against the +/-30.00D and +0.50D to +3.00D in the brochure, the abbreviated fitting guide, and the product page.

Water Gradient and CELLIGENT technology give a biomimetic surface that helps resist bacteria and lipid deposits, based on in vitro studies on unworn lenses.

Blue-Violet Light filtration acts on visible light, not ultraviolet, and filtering of high-energy visible (HEV) light by contact lenses has not been demonstrated to confer any health benefit to the user, including retinal protection or reduced eye strain.

Sphere powers run -6.00D to +4.00D in 0.25D steps, with cylinders of -0.75D, -1.25D and -1.75D and axes 10° to 180° in 10° steps, a range covering about 90% of astigmatic presbyopes.

Three add steps, LO (1.25), MED (2.00) and HI (2.50).

VISITINT.

6 count revenue pack, 1 count trial packs.

3-Zone Progressive design, one continuously descending power curve with the near zone at the lens center, the intermediate zone beginning just past the 1.0 mm tick and the distance zone just past the 2.5 mm tick, plotted across 3.0 mm of radial displacement at -3.00D high add.

Optimized for 7 biometrics: pupil size, anterior chamber depth, higher-order aberrations, axial length, corneal topography and diameter, residual accommodation across 9 distances, and subjective refraction.

Two lens adds across the entire power range, selected from the spectacle add: Low for +0.75D to +1.50D and High for +1.75D to +2.50D.

OpticAlign design, ballasting in the lower hemisphere, with the orientation mark at 6 o'clock.

Polyvinylpyrrolidone (PVP), grown around and throughout the silicone backbone in the second phase of the MoistureSeal polymerization, where it attracts moisture.